2705B Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Magnetic hanger

Data Sheet
Auto Ranging Tool Kit^® DMM
Model 2705B
Auto/ Manual Ranging
Select between Auto or
Manual ranging
The 2705B is a full-featured auto-ranging DMM that combines performance,
value and functionality. The 3400 count LCD can display resistance values up to
40 MΩ. With the auto-power-off feature, you won’t have to worry about
accidental battery consumption. Value-packed features make this meter a must in
every "Tool Kit^®".
Features
I Magnetic hanger
I One-handed operation
I Auto/manual ranging
I Auto power off
I Measures up to 10 A (AC & DC)
I DC voltage to 1000 V
I AC voltage to 750 V
I Resistance to 40 MΩ
I Continuity test
I Diode test
Specifications
2705B
model
DC Volts
Ranges
400 mV, 4 V, 40 V, 400 V, 1000V
Resolution
0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
Accuracy
±(1.0 % rdg + 2 dgts)
Input Impedance
400 mV: >100 MΩ; 4 V: 10 MΩ; 40 V to1000 V: 9.1 MΩ
Overload Protection
1000 VDC or 750 VACrms
AC Volts (50 Hz-500 Hz)
Ranges
400 mV, 4 V, 40 V, 400 V, 750V
Resolution
0.1 mV, 1 mV, 10 mV, 100 mV, 1 V
Accuracy
50 Hz to 100 Hz ±(2.0 % rdg + 5 dgts)
Input Impedance
400 mV: >100 MΩ; 4 V: 10 MΩ; 40 V to 750 V: 9.1 MΩ
Overload Protection
1000 VDC or 750 VACrms
DC Current
Ranges
400 uA, 4000 uA, 40 mA, 400 mA, 10 A
Resolution
0.1 uA, 1 uA, 10 uA, 100 uA, 10 mA
Accuracy
400 uA to 400 mA ranges: ±(2.0 % rdg + 2 dgts)
10 A range: ±(3.0 % rdg + 3 dgts)
Input Protection
0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
10A Input
10 A for 60 sec max. followed by a 10 minute cooling period
AC Current (50 Hz-500 Hz)
Ranges
400 uA, 4000 uA, 40 mA, 400 mA, 10 A
Resolution
0.1 uA, 1 uA, 10 uA, 100 uA, 10 mA
Accuracy
400 µA to 400 mA ranges: ±(2.5 % rdg + 5 dgts)
10 A range: ±(3.5 % rdg + 5 dgts)
Input Protection
0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
10A Input
10 A for 60 sec max. followed by a 10 minute cooling period
Resistance
Ranges
400 Ω, 4 kΩ, 40 kΩ, 400 kΩ, 40 MΩ
Resolution
0.1 Ω, 1.0 Ω, 10 Ω, 100 Ω, 10 kΩ,
Accuracy
400 Ω to 400 kΩ ranges: ±(1.5 % rdg + 4 dgts)
4 MΩ range: ±(2.5 % rdg + 4 dgts)
40 MΩ range: ±(5.0 % rdg + 4 dgts)
Open Circuit Voltage (typical) -0.45 VDC (-1.2 VDC on 400 Ω range)
Overload Protection
500 VDC/ACrms
Diode Test
Test Current
1.0 mA (typical)
Resolution
10 mV
Accuracy
±(3.0 % rdg + 3 dgts)
Audible Indication
<0.25 V
Open Circuit Voltage
3.0 VDC (typical)
Overload Protection
500 VDC/ACrms
Continuity
Audible Indication
Less than 25 Ω
Response Time
500 ms
Overload Protection
500 VDC/ACrms
General
Display
3 3/4 digit, 4000 count LCD
Polarity
Automatic, positive implied, negative polarity indication
Overrange
OL or -OL is displayed
Low Battery Indication
Battery symbol will display when battery voltage drops below
operating levels
Measurement Rate
2 times per second
Auto Power Off
Approximately 10 minutes
Operating Environment
0ºC to 50ºC at <70 % relative humidity
Storage Environment
-20ºC to 60ºC at 0 to 80 % relative humidity
Accuracies
Stated accuracy at 23ºC ±5ºC at <75 % relative humidity
Temperature Coefficient
0.1 x (specified accuracy) per ºC. (ºC to 18ºC, 28ºC to 50ºC)
Power
Single standard 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
Battery Life
200 hours typical
Dimensions
165 mm (H) x 78 mm (W) x 42.5 mm (D)
Weight
Approximately 10 oz. (285 g) with battery and hanger
Three-Year Warranty
Supplied Accessories: User manual, one set of test leads, one spare fuse, and 9V battery (installed)
Technical data subject to change
© B&K Precision Corp. 2013
Page 1 of 2
www.bk precision.com
Tel.: [phone]