2703C Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Magnetic hanger

Data Sheet
Manual Ranging Tool Kit^® DMM
Model 2703C
The 2703C is a versatile low cost manual ranging DMM that
combines performance, value and functionality. Value-packed features
make this meter a must in every "Tool Kit^®".
Features
I Magnetic hanger
I One-handed operation
I Measures up to 10 A (DC only)
I DC voltage to 1000 V
I AC voltage to 750 V
I Resistance to 20 MΩ
I Continuity test
I Diode test
Specifications
2703C
model
DC Volts
Ranges
Resolution
Accuracy
Input Impedance
Overload Protection
AC Volts (50 Hz-500 Hz)
Ranges
Resolution
Accuracy
Input Impedance
Overload Protection
DC Current
Ranges
Resolution
Accuracy
Input Protection
10A Input
Resistance
Ranges
Resolution
Accuracy
Open Circuit Voltage (typical)
Overload Protection
Diode Test
Test Current
Resolution
Accuracy
Open Circuit Voltage
Overload Protection
Continuity
Audible Indication
Response Time
Overload Protection
General
Display
Polarity
Overrange
Low Battery Indication
Measurement Rate
Operating Environment
Storage Environment
Accuracies
Temperature Coefficient
Power
Battery Life
Dimensions
Weight
2 V, 20 V, 200 V, 1000V
1 mV, 10 mV, 100 mV, 1 V
±(1.2 % rdg + 1 dgts)
10 MΩ
1000 VDC or 750 VACrms
200 V, 750 V
100 mV, 1 V
200 V range: ±(2.0 % rdg + 5 dgts)
750 V range: ±(2.0 % rdg + 10 dgts)
10 MΩ
1000 VDC or 750 VACrms
2 mA, 20 mA, 200 mA, 10 A
1 uA, 10 uA, 100 uA, 10 mA
2 mA to 200 mA ranges: ±(1.5 % rdg + 1 dgts)
10 A range: ±(3.0 % rdg + 3 dgts)
0.5 A/500 V & 10 A/600 V fast blow ceramic fuses
10 A for 60 sec max. followed by 10 min cooling period
200 Ω, 2 kΩ, 20 kΩ, 200 kΩ, 20 MΩ
0.1 Ω, 1.0 Ω, 10 Ω, 100 Ω, 10 kΩ,
200 Ω to 200 kΩ ranges: ±(1.5 % rdg + 4 dgts)
20 MΩ range: ±(3.0 % rdg + 5 dgts)
0.3 VDC (3.0 VDC on 200 Ω)
500 VDC/ACrms
1.0 mA (typical)
10 mV
±(3.0 % rdg + 3 dgts)
3.0 VDC (typical)
500 VDC/ACrms
Less than 100 Ω
100 ms
500 VDC/ACrms
3 1/2 digit, 2000 count LCD
Automatic, positive implied, negative polarity indication
OL or -OL is displayed
Battery symbol will display when battery voltage drps below
operating levels
2.5 times per second
0ºC to 50ºC at <70 % relative humidity
-20ºC to 60ºC at 0 to 80 % relative humidity
Stated accuracy at 23ºC +5ºC at <75 % relative humidity
0.1 x (spec. accuracy) per ºC. (ºC to 18ºC, 28ºC to 50ºC)
Single 9 volt battery, NEDA 1604, JIS 006P, IEC 6F22
200 hours typical
165 mm (H) x 78 mm (W) x 42.5 mm (D)
Approximately 10 oz. (285 g) with battery and hanger
Three-Year Warranty
Supplied Accessories: User manual, one set test of leads, one spare fuse, and 9V battery (installed)
Technical data subject to change
© B&K Precision Corp. 2013
Page 1 of 2
www.bk precision.com
Tel.: [phone]