262 Datasheet, PDF (1/1 Pages) Littelfuse – MICRO FUSE Very Fast-Acting Type 262/268/269 Series

Model 262
Tone Generator and
Cable Tracer Kit
Data Sheet
Model 262 Tone Generator and Cable Tracer Kit
Tone Generator:
The Tone Generator is a hand-held, battery-powered instrument
designed to perform a variety of tests on telephone lines.
Alligator clips and standard RJ11 plug allow the tone generator to
be connected to stripped wires, a terminal panel, wall plates, or
modular single line jacks quickly.
Cable Tracer:
The Line Tracer is a hand-held inductive tracer that will help to
identify wires without piercing the insulation. It can trace Tone
Generator signals through dry wall, wood and many other non-
metal surfaces (under ideal conditions).
Features:
Cable Tracer:
• Hi-gain, Hi-impedance amplifier
• Capable of identifying tones up to 12 inches away (under ideal conditions)
• Rugged, moisture resistant, Mylar cone speaker
Tone Generator:
• Generates Warbled Tone with selectable test frequencies
• LED indicates continuity when in CONTINUITY mode
• LED indicates positive polarity when in POLARITY mode
• Provides talk current on a dead line
• Check line Polarity
Cable Tracer Specifications:
Dimensions (H x W x D): 7.37” x 1.87” x 1.12” (187.1 x 47.5 x 28.4 mm)
Weight: 4.9 oz. (138.9 g)
Power: Standard 9-volt battery
Tone Generator Specifications:
Tone Output Level:
Approximately 8 vp-p (+3dBm, 600 
Tone Output Current: Approximately 4 mA
Tone Frequency: 1.4KHz to 1KHz or 0.84KHz to 0.7KHz with switching freq. of 14Hz or 7Hz
Continuity / Talk Test: 35mA (leads shorted), approximately 6.5 VDC (leads open)
Dimensions (H x W x D): 7” x 1.87” x 1.12” (177.8 x 47.5 x 28.4 mm)
Weight: 5.8 oz. (164.4 g)
Power: Standard 9-volt battery
1031 Segovia Circle, Placentia, CA 92870-7137
Tel.:[phone], Fax:[phone], www.bkprecision.com