25436NAH Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – Professional grade slide switches for PC boards

25000N series
Professional slide switches
Distinctive features and specifications
❑ Professional grade slide switches for PC boards
❑ Approved according to UL 1054
❑ Wave solderable
Not washable in aqueous process
❑ Available with flush, high and side actuator
❑ Various actuator lengths
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
- silver contacts (A) : 1A 30VDC
- gold plated brass contacts (LD) : 100mA 30VDC
• Minimum load :
- silver contacts (A) : 100mA 10V
- gold plated brass contacts (LD) : 10µA 5VDC - 10mA 50mV
• Initial contact resistance :
- silver contacts (A) : 10mΩ max.
- gold plated brass contacts (LD) : 50mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
1.000 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between poles
E
2.000 Vrms 50 Hz min. between terminals and frame
• Electrical life : 10.000 cycles at full load
• Low level or mechanical life : 20.000 cycles
APPROVALS
2A 250VAC
4A 125VAC
Availability : consult factory for details of approved models.
Marking : To order switches marked UL, complete the “Options and
Approvals” box of ordering format.
MATERIALS
• Case : PBT
• Actuator : polyamide, glass
filled
• Cover : polyamide, glass filled
• Contacts
A : silver
LD : brass, gold plated
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
• Operating temperature :
-40°C to +85°C
• Overall length : 14 mm (.551)
• Actuator height (outside case) :
- high : 2,80 mm (.110)
- extra high : 6 mm (.236)
- side : 2,3 mm (.090)
- long side : 6 mm (.236)
• Travel : 4 mm (.157)
E-14
www.apem.com
APEM