|
2507A-L Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Aluminum Housing Armored Cable Wide Gap | |||
|
Mounting
Holes
.16"
4.1mm dia.
3.00"
76.2mm
2.00"
50.8mm
2.88"
73.2mm
1.00"
25.4mm
.50"
12.7mm
.44"
11.2mm
Mounting Kits for 2500 Series
1092A Garage Door Track
Mounting Kit for Model 2505A
Includes:
1- 1940 bracket
1-1912 bracket
1-2505A contact,
mounting screws
and instructions
Aluminum Housing Armored
Cable Wide Gap
2500 Series
Applications
⢠Mounting brackets available for gates, garage doors, freezers
⢠Rugged construction for long life
⢠Convenient surface mounting
⢠2507AH is polarity-sensitive with reference to magnet direction
General Speciï¬cations
Enclosure
Temperature Range
Environmental
NEMA Rating
Protection Class
Response Time
Life Cycles
Lead Types/O.D.
UL/ULC Listed
Brushed anodized aluminum with ABS
plastic end caps (L)
-40°F to 150°F (-40°C to 65°C)
Hermetically Sealed Reed Switch
Encapsulated in Polyurethane
1, 2, 3, 4, 4x, 5, 6, 12
IP 67
1 msec max.
100,000 Under Full Load,
10,000,000 Under Dry Circuit
Stainless Steel Armored Cable
with #22 wire / (0.28")(0.71cm)
Most Models
1094A Curtain Door
Mounting Kit for Model 2507AH
Includes:
1- 1941 bracket
1-1942 bracket
1-2507AH contact,
mounting screws
and instructions
Order Information
Part Number
Contact1
Conï¬guration
2505A-L
N.O.
2507A-L
2507AD4-L
2507AH3,4-L
SPDT
DPDT
SPDT
Electrical Speciï¬cations
Load Rating
(AC/DC)
7.5W/VA
3W/VA
3W/VA
3W/VA
Switching Voltage
(AC/DC)
100V
30V
30V
30V
Switching Current
(AC/DC)
0.5A
0.25A
0.25A
0.25A
Contact
Resistance
0.2 Ohms
0.25 Ohms
0.25 Ohms
0.25 Ohms
Sense Range2
Nominal
3.0" (7.6cm)
3.0" (7.6cm)
1.5" (3.8cm) Min
0.8" (1.9cm) Min
Warningâ Each electrical rating is an individual maximum and cannot be exceeded!
1 Conï¬guration with actuator away from the switch
2 Proximity of ferrous materials usually reduces sense range â typically by 50%. The shape and type of material cause a wide diversity of eï¬ects.
Testing is required to determine actual sense range for speciï¬c applications. As measured on a nonferrous surface.
Gap distances are nominal make distance ± 20%. Gap Speciï¬cations are for switch to make. Break distance is approximately 1.1 to 1.5 times make.
3 Note: 2507AH biased type temperature rating: -20°F to 150°F (-28°C to 65°C).
4 Not ULC Listed
Lead
Length
3'
3'
3'
3'
1-800-336-4206
www.edwardssignalling.com 81
|