2035XD Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – DC Dual-Axis Full/Half/Microstep Drive

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel [phone]
Fax (831) 761-
6544
Product Datasheet
www.Applied-Motion.com
2035XD
DC Dual-Axis Full/Half/Microstep Drive
Product Features
Dual-axis control
Step & direction
Oscillator (velocity)
Microstepping
Idle current reduction
Optically isolated inputs
1pc. - 290.00
50pc. - 217.50
Description
The 2035XD step motor driver is a two axis, software configured step/direction or oscillator drive. Drives can be
quickly and precisely configured using our eXposition™ software and a Windows PC.
When configured for pulse/direction mode, the two drives can be commanded by the step and direction signals
available from many PLCs and step motor indexers.
In oscillator mode, the two drives generate their own acceleration and deceleration profiles and are commanded by
digital run/stop signals. These signals can be supplied by PLCs, mechanical switches, single board computers or
other motion control devices. Speeds may be fixed or can be set “on the fly” by 0 to 5 volt analog signals.