2012A Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – INTEGRAL ELECTRONICS (IEPE) PIEZOELECTRIC ACCELEROMETER

Quality
Innovations
Customer Satisfaction
INTEGRAL ELECTRONICS (IEPE)
PIEZOELECTRIC ACCELEROMETER
• Measurement Range to 100 g
MODEL
2012A
• Ground Isolation
• Low Impedance Output
• Top Connector
• Stud Mounted
actual size
Description
The VIP Sensors Model 2012A is a stud mounted piezoelectric
accelerometer designed for general vibration measurement on
structures and objects. It offers a measurement range to 100 g
with a sensitivity of 50 mV/g. The accelerometer transmits its low
impedance voltage output through the same cable that supplies
the constant current power.
1M0-352(O(OUUTT))
The Model 2012A design is sealed against external
contamination. Signal return is isolated from the outer case of the
unit. The accelerometer features a 10-32 top connector that is
used with coaxial cable for error-free operation.
VIP Sensors Signal Conditioner Models 5005, 5100 and 5102 are
recommended for use with this low impedance accelerometer.
1_M0-3₅2
S=0.689 0.787
S=17.5 20
in (mm)
Typical Amplitude Response
20
15
10
5
0
-5
1
10
100 1000 10000 100000
FREQUENCY IN Hz
15
10
5
0
-5
-10
-15
-50
(-46)
Typical Temperature Response
50
150
250
(10)
(66)
(121)
TEMPERATURE °F (°C)
350
(177)
VIP Sensors
California, USA
Ph [phone]
Fx [phone]
[e-mail]
www.vipsensors.com
VIP Sensors reserves the right to modify
these specifications without notice. V01