2005B Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – 100 kHz to 150 MHz on six bands

Data Sheet
150 MHz RF Generator
Model 2005B
The 2005B supplies sine wave outputs from 100 kHz to
150 MHz (harmonics usable to 450 MHz) at up to 100
mV (RMS). The output can be amplitude modulated with
an internal 1 kHz signal or with an external audio signal
up to 1 V (RMS). An external crystal can be plugged in
for precise frequency control. The output is provided via
a BNC female connector.
I 100 kHz to 150 MHz on six bands
I Output to 450 MHz on harmonics
I AM modulation, internal or external Step and variable
attenuation
Specifications
2005B
Main Output
Frequency Range
100 kHz to 150 MHz (up to 450 MHz on third harmonics)
A) 100 kHz-300 kHz
B) 300 kHz-1 MHz
C) 1 MHz-3.2 MHz
D) 3 MHz-10 MHz
E) 10 MHz-35 MHz
F) 32 MHz-150MHz
(96-450 MHz on harmonics)
Dial Accuracy
±3%
RF Output Level
Continuously variable. Step attenuator provides
approximately 20 dB of attenuation
Maximum Output
Approximately 100 mV rms to 35 MHz. Continuously variable
in hi or lo step, at least 20 dB range of adjustment
Frequency Monitor Output
Frequency
100 kHz to 150 MHz
Level
50 mV rms min. fixed, unmodulated signal
Amplitude Modulation
Internal
Frequency 1 kHz; level continuously variable. Modulation signal
available at front panel jack; fixed 1 V rms (min) into approx. 10 kΩ
External Frequency
50 Hz to 20 kHz
Sensitivity Approximately
100 mV rms
General
AC Input
120/220/240V ±10%, 50/60 Hz
Dimensions (HxWxD)
5.91 x 9.84 x 5.12" (150 x 250 x 130 mm)
Weight
5.5 lbs. (2.5 kg)
One-Year Warranty
Included Accessories
BNC to insulated clip output cable, detachable power cord, and
instruction manual
Technical data subject to change
© B&K Precision Corp. 2014
v080514
www.bkprecision.com