20011 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Wiha Quality Tools

Wiha Quality Tools
See Product Category Index
Go To
Image Index
Go To
Numerical Index
96
Toll Free: [phone]
1000Volt
NEW _From Wiha
SHOP
200 Metric Open-Ended Spanners, With Insulated Handle
Insulation According to VDE Specification 0680 and EN/IEC 60900,
DIN 7446, up to 1000 Volt. Individually Tested. Chrome-vanadium
steel, hardened. Angled 15^O.
1000Volt
SHOP
Item
OAL OAL
200 91 Set 15 Pcs. Metric Open End Insulated Spanners
No.
mm mm Inch
lbs. pkg.
Item
OAL
OAL
200 06 6
97 3.8
.04 1
No.
mm mm
mm mm lbs.
200 07 7
98 3.9
.05 1
200 91 200 06 6
97
200 14 14
150 3.0
200 08 8
104 4.1
.07 1
200 07 7
98
200 15 15
151
200 09 9
108 4.3
.07 1
200 08 8
104 200 16 16
164
200 10 10 107 4.2
.08 1
200 09 9
108 200 17 17
162
200 11 11 118 4.6
.11 1
200 10 10 107 200 19 19
178
200 12 12 129 5.1
.11 1
200 11 11 118 200 22 22
196
200 13 13 137 5.4
.17 1
200 12 12 129 200 24 24
211
200 14 14 150 5.9
.19 1
200 13 13 137
200 15 15 151 5.9
.17 1
200 16 16 164 6.5
.22 1
200 17 17 162 6.4
.24 1
200 18 18 173 6.8
.33 1
200 19 19 178 7.0
.32 1
I
200 22 22 196 7.7
N
200 24 24 211 8.3
D
200 27 27 218 8.6
E
X
200 30 30 235 9.3
200 32 32 237 9.3
.39 1
.58 1
.60 1
.90 1
.93 1
1000Volt
SHOP
200 93 Set 8 Pcs. Metric Open End Insulated Spanners
Item
OAL
OAL
No.
mm mm
mm mm lbs.
200 93 200 06 6
97
200 13 13
137 1.4
200 07 7
98
200 14 14
150
200 08 8
104 200 17 17
162
200 10 10 107 200 19 19
178
PREVIOUS
Use & Care Guide For Insulated Tools:
Store tools to minimize risk of damage to insulation, always wear
approved eye protection, Inspect insulation prior to each use of any
insulated tool. Use insulated tools where the ambient temperature is
between -20 to +70^O C. Have a qualified safety technician visually
inspect insulation on tools annually for safe use.
WARNING!
Insulated Tools are intended to provide protection against accidental
contact with charged energized circuits. For maximum safety we
recommend de-energizing all circuits whenever possible before starting
work on electrical apparatus or conductors. Always visually inspect
insulation on tools before use, do not use tools if insulation shows signs
of wear or damage to the insulated areas of the tool. Wear appropriate
eye protection when using hand tools. Use NFPA70E certified insulated
protective outer wear when appropriate.
NEXT