16270 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – STATFREE MATERIAL, VINYL, DISSIPATIVE, HOMOGENEOUS, .100" (2.5MM)

Blue, Brown, Beige
Electrical Properties:
Property
RTG Resistance:
RTT Resistance:
Test Method
ESD S4.1
ESD S4.1
Value
10⁹ - 10¹⁰ Ohms
10⁹ - 10¹⁰ Ohms
Electrical Properties obtained by testing to industrial standards by
an independent testing laboratory @ 100 Volts and 50% relative
humidity unless otherwise specified. Complete text of the test
report is available upon request.
Disclaimer:
All statements, technical data, and recommendations contained herein are
based upon tests we believe to be reliable. However, the accuracy or
completeness thereof is not guaranteed. The proper and correct
applications of products and data is the responsibility of the user.
Statements or recommendations not contained herein shall have no force
or effect unless embodied in a written agreement signed by authorized
officers of Desco Industries, Inc.
Matting materials have a tendency to shrink slightly when first unrolled. In
applications where length is critical, allow the material to relax for at least 4
hours before cutting to size. Always trim with a sharp knife or razor blade.
Specifications:
Construction:
Homogeneous extruded
thermoplastic vinyl
Thickness:
0.100" (2.54mm)
Texture:*
Embossed
Colors:*
Blue, Brown, Beige
Weight:
0.75 lbs/ft² (0.366 grams/cm²)
Hardness:
80 shore A (ASTM D-2240)
Wear Resistance: Negligible weight loss (750 cycles, Taber CS-17
Method)
*Color and texture may vary between lots and mills
Grounding: This material must be properly grounded for optimum
electrial performance. Ask for Technical Bulleltin TB-2000 for mat
grounding instructions.
Cleaning: For optimum electrical performance, surface must be
cleaned regularly using an ESD mat cleaner. We suggest using our
Reztore™ Surface & Mat Cleaner Item #10435 or Static-Wipes Item
#10600. Do not use cleaners with silicone. Silicone buildup will
create an insulative film on the surface.
See reverse side for
available mat and roll sizes
Description:
This reversible vinyl material has a
smooth finish on one side and a non-
glare finish on the other. It may be used
as a table or floor mat, with either side
up. To extend life of mat, it can be turned
over when one side is worn.
Statfree^® Type B is manufactured
without any ozone depleting
substances, and in accordance
with the Montreal Protocol.
DESCO INDUSTRIES INC.
Employee Owned
STATFREE^® MATERIAL, VINYL, DISSIPATIVE, HOMOGENEOUS, .100" (2.5MM)
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: www.desco.com
PHONE [phone] FAX [phone]
DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407
PHONE [phone] FAX [phone]
MATERIAL TYPE B
DRAWING PM-78
DATE:
5/01