15KP17 Datasheet, PDF (1/4 Pages) Microsemi Corporation – TRANSIENT ABSORPTION ZENER

15KP17 thru 15KP280CA
Transient Voltage Suppressor
Breakdown Voltage 17 to 280 Volts
Peak Pulse Power 15,000 Watts
Features
CASE: R-6
 Breakdown Voltages (V_BR) from 17 to 280V
 15000W peak pulse power capability with a 10/1000μs
waveform, repetitive rate (duty cycle):0.05%
 Fast Response Time
 Low incremental surge resistance
 Excellent clamping capability
 Available in uni-directional and bi-directional
 High temperature soldering guaranteed: 265℃ /10
印无效 _{Dimensions in inches and (millimeters)}
seconds, 0.375” (9.5mm) lead length, 5lbs. (2.3kg)
tension
Application
 Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on IC_S, MOSFE, signal lines of sensor units for
consumer, computer, industrial, automotive and
telecommunication
Mechanical Data
 Case: Void-free transfer molded thermosetting epoxy
body meeting UL94V-O
 Terminals: Tin-Lead or ROHS Compliant annealed
matte-Tin plating readily solderable per MIL-STD-750,
Method 2026
 Marking: Body marked with part number
 Polarity: Band denotes cathode. Bidirectional not
marked.
 Weight: 2.1g（Approximately）
打 ^{Maximum Ratings and Electrical Characteristics @ 25OC unless otherwise specified}
Symbol
Conditions
Value
Unit
P_PPM Peak pulse power capability with a 10/1000μs
15000
W
I_PPM
P_M(AV)
Peak pulse current with a 10/1000μs
Steady state power dissipation at T_L=30℃ ,Lead lengths 0.375”(10mm)
Steady state power dissipation at T_A=25℃ when mounted on FR4 PC
described for thermal resistance
SEE TABLE1
A
6
W
1.56
W
R_θJL
R_θJA
T_J, T_STG
Thermal resistance junction to lead
Thermal resistance junction to ambient
Operating and Storage Temperature
20
80
-65 to +150
℃/W
℃/W
℃
Document Number: 15KP17 thru 15KP280CA
Feb.29, 2012
1
www.smsemi.com