1411967 Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – Flush-type connector

https://www.phoenixcontact.com/gb/products/1411967
Flush-type connector - SACC-CI-M12FST-4P SMD SH T - 1411967
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Flush-type connector, 4-position, SocketLink:straightLink:M12, T power, PCB mounting, SMD
Key Commercial Data
Packing unit
GTIN
Custom tariff number
Technical data
Ambient conditions
Ambient temperature (operation)
Degree of protection
General
Note
Rated current at 40°C
Rated voltage
Rated surge voltage
Number of positions
Insulation resistance
Coding
Standards/regulations
Overvoltage category
Pollution degree
Connection method
Insertion/withdrawal cycles
1
85366990
-25 °C ... 105 °C (Plug / socket)
-55 °C ... 105 °C (without mechanical actuation)
IP67 (correctly plugged in and locked)
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
12 A
60 V
1.5 kV
4
≥ 100 MΩ
T power
M12 connector IEC 61076-2-111 In line with
III
3
SMD
> 100
30/11/2015 Page 1 / 5