1411962 Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – Flush-type connector

https://www.phoenixcontact.com/gb/products/1411962
Flush-type connector - SACC-CIP-M12MST-4P SMD SH T - 1411962
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Flush-type connector, 4-position, PlugLink:straightLink:M12, T power, PCB mounting, SMD
Key Commercial Data
Packing unit
Minimum order quantity
GTIN
Weight per Piece (excluding packing)
Custom tariff number
Country of origin
Product key
Note
Technical data
Ambient conditions
Ambient temperature (operation)
Degree of protection
General
Note
Rated current at 40°C
Rated voltage
Rated surge voltage
Number of positions
Insulation resistance
60 pc
60 pc
4.76 g
85366990
Germany
ABQEAC
Made to Order (non-returnable)
-25 °C ... 105 °C (Plug / socket)
-40 °C ... 105 °C (without mechanical actuation)
IP67 (correctly plugged in and locked)
IP65 (not plugged in, by means of additional O-ring seal with device)
The electrical and mechanical data specified assume that the connector
pair is correctly locked and mounted. If the connector is unlocked and if
there is a danger of contamination, the connector must be sealed using
a protective cap > IP54. Influences arising from litz wires, cables or PCB
assembly must also be taken into consideration.
12 A
60 V
1.5 kV
4
≥ 100 MΩ
30/11/2015 Page 1 / 5