13285 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – STATSHIELD BAG, SHIELDING, METAL-OUT CONSTRUCTION, ZIPPER, .0030" (.0762mm)

Low Charging
Zipper
Side Weld Seals 3/8 in. (±0.10)
High Performance Static
Dissipative Abrasion
Resistant Coating
Aluminum
Shielding Layer
Low Charging Static
Dissipative Proprietary
Polyester Layer
Low Charging Static
Dissipative Proprietary
Inner Polyethylene Layer
Date & Lot Code
Printed for QC
Traceablility
STATSHIELD^® METAL-OUT SERIES
Meets the required limits of ANSI/ESD S20.20, Packaging standard ANSI/ESD S541, and Static
Control Bag standard ANSI/ESD S11.4-2012 Level 3.
Specifications:
Electrical Properties
Surface Resistance:
  Outer Surface
Inner Surface
Static Shielding
Charge Generation (nC/in²⁾
Capacitance Probe (to dissipate 1 KV)
Typical Values
< 1 x 10⁸ ohms
≥ 1 x 10⁴ to < 1 x 10¹¹ ohms
<20 nJ
Teflon: -0.03
Quartz: +0.10
<30 volts
Test Procedures/Method
ANSI/ESD STM11.11
ANSI/ESD STM11.11
ANSI/ESD STM11.31, EIA 541
Modified Incline Plane
Modified Incline Plane
ANSI/EIA-541/Appendix E, 1 kV Discharge
Physical Properties:
Bag Thickness:
  Thickness
Width (Inside Dimensions)
Length (Inside Dimensions)
Light Transmission
Tensile
Puncture Resistance
MVTR
Heat Seal
Outgassing
Non-corrosive
Nominal .0030" (.0762mm) ±10%
Nominal -0" / + .125"
Nominal ± .125"
40% (Tobias)
9000 PSI
>10 lbs
0.40
>10 lbs/in.
Pass
Pass
MIL-STD-3010, 1003
ASTM D-1003
ASTM D882
MIL-STD-3010, 2065
ASTM F-1249
375°F, 1/2 sec 60 psi
ASTM E595
MIL-STD-3010, M3005
Chemical Properties
Corrosion:

No effect on aluminum, copper, silver, Sn-Pb coated foil,
stainless steel, low carbon steel
Polycarbonate compatible:
Contains no Amines, Amides, or N-Octanoic Acid.
Bag is free of amines, N-octanoic acid, silicones, and heavy metals.
ANSI/ESD S541 Section 6.2 Outside an EPA
“Transportation of sensitive products outside of an EPA shall require packaging that provides:
1. Low charge generation
2. Dissipative or conductive materials for intimate contact
3. A structure that provides electrostatic discharge shielding.”
RoHS 2 and REACH Statement
None of the RoHS 2 restricted materials or REACH substances of very high concern as of
2012/12/19 are intentionally added in manufacturing this product. Ref: European Union Directive
2011/65/EU and Regulation (EC) No. 1907/2006/CE. See Desco Limited Warranty at Desco.com.
Mixed Unsortable Plastic Scrap
Statshield^® and Statfree^® are Registered Trademarks of Desco Industries Inc.
7
Mixed unsortable plastic scrap shall contain assorted plastics
See Bag Selection Chart Click HERE.
of multiple grades that are co-extruded, bonded or laminated
together which are unsortable into individual grades
Desco’s bags are recyclable
Specifications and procedures subject to change without notice.
Made in the
United States of America
Statshield^® bags are packaged 100 per package in an oversized shielding bag.
See Shielding Bag Storage at TB-7057.
STATSHIELD^® BAG, SHIELDING, METAL-OUT CONSTRUCTION, ZIPPER, .0030" (.0762mm)
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE [phone]
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE [phone]
DRAWING
NUMBER
13205
DATE:
October
2013
© 2013 DESCO INDUSTRIES INC.
Employee Owned