13080 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – STATSHIELD BAG, SHIELDING, METAL-OUT CONSTRUCTION, .0030 (.0762mm)

STATSHIELD^® METAL-OUT SERIES
Specifications:
Electrical Properties
Typical Values
Surface Resistance:
  Outer Surface
<10E8 ohms
  Inner Surface
<10E11 ohms
Static Shielding
Charge Generation (nC/in²⁾
<25 nJ
Teflon: -0.03
Quartz: +0.10
Capacitance Probe (to dissipate 1 KV) <30 volts
Test Procedures/Method
ANSI/ESD STM11.11
ANSI/ESD STM11.11
ANSI/ESD STM11.31, EIA 541
Modified Incline Plane
Modified Incline Plane
ANSI/EIA-541/Appendix E, 1kV Discharge
Date & Lot Code
Printed for QC
Traceablility
Physical Properties:
Bag Thickness:
  Thickness
Width (Inside Dimensions)
Length (Inside Dimensions)
Light Transmission
Tensile
Puncture Resistance
MVTR
Heat Seal
Outgassing
Non-corrosive
Nominal .0030" (.0762mm) ±10%
Nominal -0" / + .125"
Nominal ± .125"
40% (Tobias)
9000 PSI
>10 lbs
0.40
>10 lbs/in.
Pass
Pass
MIL-STD-3010, 1003
ASTM D-1003
ASTM D882
MIL-STD-3010, 2065
ASTM F-1249
375°F, 1/2 sec 60 psi
ASTM E595
MIL-STD-3010, M3005
Side Weld Seals 3/8 in. (±0.10)
Chemical Properties
Corrosion:

No effect on aluminum, copper, silver, Sn-Pb coated foil,
stainless steel, low carbon steel
High Performance Static
Dissipative Abrasion
Resistant Coating
Aluminum
Shielding Layer
Low Charging Static
Dissipative Proprietary
Polyester Layer
Polycarbonate compatible:
Contains no Amines, Amides, or N-Octanoic Acid.
Bag is free of amines, N-octanoic acid, silicones, and heavy metals.
ANSI/ESD S541 Section 6.2 Outside an EPA
“Transportation of sensitive products outside of an EPA shall require packaging that provides:
1. Low charge generation
2. Dissipative or conductive materials for intimate contact
3. A structure that provides electrostatic discharge shielding.”
Low Charging Static
Dissipative Proprietary
Inner Polyethylene Layer
Mixed Unsortable Plastic Scrap
7
Mixed unsortable plastic scrap shall contain assorted plastics
of multiple grades that are co-extruded, bonded or laminated
together which are unsortable into individual grades
Desco’s bags are recyclable
RoHS and REACH Compliance Statement
None of the RoHS restricted materials or REACH substances of very high concern are intentionally
added in manufacturing this product. Ref: Directive 2002/95/EC Article 4.1. and Regulation (EC) No.
1907/2006. See Desco Industries Inc. Limited Warranty at Desco.com.
The bag’s material meets the required limits of ANSI/ESD S541 per ANSI/ESD S20.20.
Statshield^® and Statfree^® are Registered Trademarks of Desco Industries Inc.
Specifications and procedures subject to change without notice.
Made in the
United States of America
Statshield^® bags are packaged 100 per package in an oversized shielding bag.
Shelf life of bags is minimum one year in normal indoor storage conditions.
STATSHIELD^® BAG, SHIELDING, METAL-OUT CONSTRUCTION, .0030" (.0762mm)
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE [phone] FAX [phone]
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE [phone] FAX [phone]
DRAWING
NUMBER
13010
DATE:
October
2011
© 2011 DESCO INDUSTRIES INC.
Employee Owned