12789 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – STATSHIELD METAL-IN SERIES LEAD-FREE AREA ESD SHIELDING BAG

Specifications:
STATSHIELD^® METAL-IN SERIES
LEAD-FREE AREA ESD SHIELDING BAG
Electrical Properties
Typical Values
Surface Resistance:
  Outer Surface
<10E11 ohms
  Aluminum Layer
<10E2 ohms
  Inner Surface
<10E11 ohms
Static Shielding
<25 nJ
Charge Generation
Teflon: 0.09 nC/sq. in.
Quartz: 0.01 nC/sq. in.
Capacitance Probe (to dissipate 1 KV) <30V
Test Procedures/Method
ANSI/ESD S11.11
ANSI/ESD S11.11
ANSI/ESD S11.11
ANSI/ESD S11.31
Modified Incline Plane
Modified Incline Plane
ANSI/EIA 541/Appendix E, 1kV Discharge
Side Weld Seals 3/8 in. (±0.10)
Proprietary film - available only from Desco Industries Inc.
Physical Properties
Bag Thickness:
  Thickness
Width (Inside Dimensions)
Length (Inside Dimensions)
Light Transmission (%)
Heat Seal (lbs/in)
Seam Strength
Tear Strength (lbs)
Puncture Resistance (lbs)
MVTR (gms / 100 in2 / 24 hrs, 100°F)
OTR (cc / 100 in2 / 24 hrs)
Abrasion Resistance
Outgassing
Non-corrosive
Chemical Properties
The bag’s material meets the performance specification requirements of
ANSI/ESD S541.
Bag is free of amines, N-octanoic acid, and heavy metals.
Corrosion

Polycarbonate Capability,
No Amines or N-Octanoic Acid
Statshield^®, Statfree^®, and Faraday^® are Registered Trademarks of Desco Industries Inc.
Nominal .0030” (.0762mm) ±10%
Nominal -0” / + .125”
Nominal ± .125”
>40% (Tobias)
>10
Pass
>25
>10
<0.40
<6.1
>100 cycles
Pass
Pass
ASTM D-2103
ASTM D-1003
375°F, 1/2 sec 60 psi
ANSI/ESD S541
ASTM D-1004
ASTM D-2065
FTMS 101C/2065
ASTM D-1434
Sutherland Abr. (.0000 Steel Wool)
ASTM E595
MIL-STD-3010, M3005
No effect on aluminum, copper, silver, Sn-Pb coated foil,
stainless steel, low carbon steel
Yes
Not present
RoHS Compliance Statement
None of the following materials are intentionally added in manufacturing this
product: lead, mercury, cadmium, hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1. See Desco Industries Inc. letter on-line
at Desco.com
Mixed Unsortable Plastic Scrap
Mixed unsortable plastic scrap shall contain assorted
7
plastics of multiple grades that are co-extruded,
bonded or laminated together which are unsortable into
individual grades.
Desco’s bags are recyclable
Low Charging Static
Dissipative Proprietary
Outer Polyester Layer
Aluminum Shielding Layer
Low Charging Static
Dissipative Proprietary Inner
Polyethylene Layer
ANSI/ESD S541 Section 6.2 Outside an EPA
“Transportation of sensitive products outside of an EPA shall
require packaging that provides:
1. Low charge generation
2. Dissipative or conductive materials for intimate contact
3. A structure that provides electrostatic discharge shielding.”
Made in the
United States of America
STATSHIELD® BAG, SHIELDING, METAL-IN CONSTRUCTION, GREEN
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE [phone]
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE [phone]
DRAWING
NUMBER
12780
DATE:
December
2012
© 2012 DESCO INDUSTRIES INC.
Employee Owned