1249B Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – NTSC color bar pattern, ±5 and

1249B
1211E
Specifications
Color Bars
Chroma
Accuracy
Staircase
Rasters
1249B
White (75% or 100%, switch selectable)
Yellow, Cyan, Green, Magenta, Red,
Blue, Black (7.5% set-up)
Switch Selectable
±5˚ and ±5 IEEE
COLOR OFF obtains staircase
from color bars
Black
Window
Convergence
Does not apply
Center dot
7x11 dots
7x11 crosshatch
Center Cross
RF Output
Level
Impedance
Stability
S-Video
Channels: CH 3, CH 4, IF.
61.25, 67.25, 45.75 MHz±0.008 MHz
10 mV rms minimum into 75Ω
75Ω
Does not apply
Composite Video
Amplitude
Impedance
RGB Output
Patterns
Level
Impedance
Sound
Sync Outputs
Composite
Horizontal
Vertical
Impedance
Color Subcarrier
Power Source
1V p-p into 75Ω
Negative or positive polarity sync available
Variable 0 to ±1.2V p-p into 75Ω
Calibrated 1V p-p position with negative sync.
75 Ω
BNC and D-Type Sub-Miniature Connectors.
convergence and color bars
TTL level and low level, (0.8±0.2V), switch selectable
75Ω
4.5 MHz ±0.2% modulated by approximately
1 kHz audio tone, switch selectable
NTSC-M TTL level; interlace for NTSC color bars
and switch selectable interlace or progressive for
convergence patterns (negative polarity sync)
TTL level (Positive polarity sync.)
TTL level (Positive polarity sync.)
75Ω
NTSC signal: 3.579545 MHz (+50Hz)
105 to 130VAC, 60Hz, 8W
Operating Temperature
Dimensions
Weight
32˚ to 122˚F (0˚to +50˚C)
3.39 x 10.39 x 11.42" (86 x 264 x 290mm)
2.8 lbs (1.3kg)
Accessories
SUPPLIED: instruction Manual, 9V battery (1211E)
OPTIONAL: BE-12 AC adapter
74
models
1211E
White, Yellow, Cyan, Green,
Magenta, Red, Blue, and Black
Auto/Manual
Linear staircase signal with 5 equal
steps from black to white
White, Red, Green, Blue, Yellow,
Cyan, Magenta, and Black
White window on black background
15 vertical x 11 horizontal
white dots on black raster
white lines on black raster
Centering Box on screen
Circle with 1x1 crosshatch
CH3 = 61.25MHz, crystal controlled
75Ω
50 ppm.
Chrominance Output: 0.75V
p-p into 75Ω
Luminance plus Sync Output:
1V p-p into 75Ω
1.2V p-p into 75Ω
Model 1249B
NTSC Generator with RGB
The 1249B is ideal for comprehensive testing,
servicing and adjustment of video and televi-
sion equipment, television receivers, video tape
recorders, video monitors, closed circuit televi-
sion systems and components, and master
antenna systems and components.
■ NTSC color bar pattern, ±5 and
±5 IEEE units
■ CH 3, CH 4, and IF outputs
crystal controlled
■ Calibrated 1Vp-p or variable
composite video output
■ RGB outputs on BNC or 9-pin
D connector
■ Composite sync, vertical sync,
and horizontal sync outputs
■ Interlaced or progressive scan
■ 30 Hz signal is provided for
isolation of servo problems in VCR’s
Does not apply
Model 1211E
Portable NTSC Pattern
Generator with S-Video,
Composite Video and
RF outputs
Does not apply
9V battery or AC Adapter (not included)
(9V DC, 100mA 5.5mm x 2.5mm center pin)
1.5 x 3.8 x 5.7" (38 x 97 x 145mm)
9.6oz. (272g)
One Year Warranty
This handheld NTSC Pattern Generator is
powered by a 9 volt battery or AC adapter
providing NTSC color bars, crosshatch, dot,
staircase, circle, center cross, windows, and
a full range of color raster patterns. The out-
puts available are composite video via RCA
connector, a RF output BNC connector, or an
S-Video mini-DIN output. Signals can be pro-
duced as an interlaced or progressive scanning
mode.
■ S-Video, composite video,
RF output
■ Interlace or progressive scanning
system
■ 9VDC battery (included)
■ AC adapter available