1240I-485 Datasheet, PDF (1/3 Pages) List of Unclassifed Manufacturers – DC Microstep Drive w/ Si Programming & Encoder Input

Applied Motion Products, Inc.
404 Westridge Dr.
Watsonville, CA 95076, USA
1-800-525-1609
Tel [phone]
Fax (831) 761-
6544
Product Datasheet
www.Applied-Motion.com
1240i-485
DC Microstep Drive w/ Si Programming & Encoder Input
Product Features
Microstepping
Programmable motor current
Idle current
8 user-programmable inputs
3 optically isolated outputs
Screw terminal connectors
RS-485 port
1pc. - 358.00
50pc. - 268.50
Description
The 1240i-485 is a step motor drive with on-board controller designed for use in applications that require
streaming serial commands to one or more drives over an RS-485 serial connection. The drive provides up to 48
Watts of power to the step motor.
The 1240i-485 comes with an RS-485 port instead of the RS-232 port on the standard1240i , enabling multiple
1240i-485 drives to be used in a multi-drop serial network in which a host PC or PLC commands the drives using
SCL commands.
The 1240i-485 includes eight (8) optically isolated programmable inputs for triggering, branching, position sensing
and end of travel detection. Three (3) optically isolated programmable outputs can send signals to other electronic
devices and activate relays.
Note that the 1240i-485 does not support the Si Programmer™ Windows software. If your application requires
stand-alone programming using Si Programmer™ see the standard 1240i drive.