124-105111 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – DC POWER CONTACTORS

SPNO/SPDT
DC POWER
CONTACTORS
Type 124
TYPE 124
Single Pole Normally Open, or Single Pole Double Throw Contacts.
Dust Resistant and Endcaps are Isolated from Bracket
SPECIFICATIONS
Dimensions, 124-105111,-114111,-117111. . . . 3.56”L x 3.13”W x 2.19”H
Dimensions, 124-305111,-314111. . . . . . . . . . . 4.69”L x 3.13”W x 2.19”H
Weight, 124-105111,-114111,-117111 . . . . . . . . . . 16.0 oz.
Weight, 124-305111,-314111 . . . . . . . . . . . . . . . . . 19.0 oz.
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . -40° to +149°F
Terminations, Contacts. . . . . . . . . . . . . . . . . . . . ⁵/16”-24 UNF-2A thread
Terminations, Coil. . . . . . . . . . . . . . . . . . . . . . . . #10-32 UNF-2A thread
Recommended Mounting. . . . . . . . . . . . . . . . . . . . . . . Vertical plane with coil terminals up
Hardware Torque, Contact Terminal. . . . . . . . . . . . . . . 60 in. lbs. max.
Hardware Torque, Coil Terminal. . . . . . . . . . . . . . . . . . 12-18 in. lbs.
Caution: A back-up wrench must be used to hold the bottom nut stationary.

Coil
Coil
Contact Rating (Amps) – Inductive Load
Model
Duty
Terminal Bracket
Voltage Resistance Contact Voltage Normally Open
Normally Closed
Number
Cycle
Type ➀
Style
D.C. (Ohms) ➁ Material D.C. Continuous Inrush Continuous Inrush
124-105111 Continuous
4 Standard 12 13.2 Silver Alloy 12 100
400
–
–
124-114111 Continuous
4 Standard
24
53.0 Silver Alloy 24 100
400
–
–
124-314111 Continuous
6 Standard
24
53.0 Silver Alloy 24 100
400
50 100
124-117111 Continuous
4 Standard
36 120.0 Silver Alloy 36 100
400
–
–
124-317111 Continuous
6 Standard
36 120.0 Silver Alloy 36 100
400
50 100
➀ “4” = Isolated Coil, SPNO
“6” = Isolated Coil, SPDT
➁ Coil resistance in Ohms @ 25°C
➂ Inrush Current: Current applied within the first 1/2 second of contact closure
Type 586 SPNO
TYPE 586
Single Pole Normally Open, or Single Pole Double Throw Contacts.
Water Resistant and Case is Isolated from Bracket
SPECIFICATIONS
Dimensions, 586-114111,-117111. . . . . . . . . . . 3.69”L x 3.30”W x 2.90”H
Dimensions, 586-317111. . . . . . . . . . . . . . . . . . 4.61”L x 3.30”W x 2.90”H
Weight, 586-114111,-117111 . . . . . . . . . . . . . . . . . . 24.0 oz.
Weight, 586-317111 . . . . . . . . . . . . . . . . . . . . . . . . . 26.0 oz.
Temperature Range . . . . . . . . . . . . . . . . . . . . . . . -40° to +149°F
Terminations, Contacts. . . . . . . . . . . . . . . . . . . . ⁵/16”-24 UNF-2A thread
Terminations, Coil. . . . . . . . . . . . . . . . . . . . . . . . #10-32 UNF-2A thread
Recommended Mounting. . . . . . . . . . . . . . . . . . . . . . . Vertical plane with coil terminals up
Hardware Torque, Contact Terminal. . . . . . . . . . . . . . . 60 in. lbs. max.
Hardware Torque, Coil Terminal. . . . . . . . . . . . . . . . . . 12-18 in. lbs.

Coil
Coil
Contact Rating (Amps) – Inductive Load
Model
Duty
Terminal Bracket
Voltage Resistance Contact Voltage Normally Open
Normally Closed
Number
Cycle
Type ➀
Style
D.C. (Ohms) ➁ Material D.C. Continuous Inrush➂ Continuous Inrush➂
586-105111 Continuous
4 Standard 12
21.0 Silver Alloy 12
200
600
–
–
586-108111 ➃
Continuous
4 Standard 15
32.8 Silver Alloy 15
200
600
–
–
586-114111 Continuous
4 Standard
24
84.0 Silver Alloy 24
200
600
–
–
586-117111 Continuous
4 Standard
36 189.0 Silver Alloy 36
200
600
–
–
586-120111 Continuous
4 Standard
48
336.0 Silver Alloy 36
200
600
–
–
586-314111 Continuous
6 Standard
24
84.0 Silver Alloy 24
200
600 100
200
586-317111 Continuous
6 Standard
36 120.0 Silver Alloy 36
200
600 100
200
➀ “4” = Isolated Coil, SPNO
“6” = Isolated Coil, SPDT
➁ Coil resistance in Ohms @ 25°C
➂ Inrush Current: Current applied within the first 1/2 second of contact closure
➃ Ideal for 12V charging systems
NOTE: CAUTION must be used in coil selection for use in 12 volt
sytems where battery charging may expose coil to continuous,
higher-than-rated voltage. 15 volt coils are recommended.
White-Rodgers will not be responsible for consequences of misap-
plied solenoids.
120
www.white-rodgers.com