1210L-005 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – ANALOG ACCELEROMETER

SILICON DESIGNS, INC
Model 1210
ANALOG ACCELEROMETER
! SENSOR:
Capacitive Micromachined
Nitrogen Damped
Hermetically Sealed
! ±4V Differential Output or
0.5V to 4.5V Single Ended Output
! Fully Calibrated
! Responds to DC & AC Acceleration
! -55 to +125 EC Operation
! +5 VDC, 7 mA Power (typical)
! Non-Standard g Ranges Available
! Integrated Sensor & Amplifier
! LCC or J-Lead Surface
ORDERING INFORMATION
Full Scale
Acceleration
Hermetic Packages
20 pin LCC 20 pin JLCC
±5 g
1210L-005
1210J-005
Mount Package
! Serialized for Traceability
! RoHS Compliant
±10 g
±25 g
±50 g
±100 g
1210L-010
1210L-025
1210L-050
1210L-100
1210J-010
1210J-025
1210J-050
1210J-100
±200 g
1210L-200
1210J-200
DESCRIPTION
±400 g
1210L-400
1210J-400
The Model 1210 is a low-cost, integrated accelerometer for use in zero to medium frequency instrumentation
applications. Each miniature, hermetically sealed package combines a micro-machined capacitive sense element
and a custom integrated circuit that includes a sense amplifier and differential output stage. It is relatively insensitive
to temperature changes and gradients. Each device is marked with a serial number on its bottom surface for
traceability. An optional calibration test sheet (1210-TST) is also available which lists the measured bias, scale factor,
linearity, operating current and frequency response.
OPERATION
The Model 1210 produces two analog output voltages which vary with acceleration as shown in the figure below. The
outputs can be used either in differential or single ended mode referenced to +2.5 volts. Two reference voltages, +5.0
and +2.5 volts (nominal), are required; the output scale factor is ratiometric to the +5 volt reference voltage, and both
outputs at zero acceleration are equal to the +2.5 volt reference. The sensitive axis is perpendicular to the bottom
of the package, with positive acceleration defined as a force pushing on the bottom of the package.
APPLICATIONS
COMMERCIAL
! Automotive
Air Bags
Active Suspension
Adaptive Brakes
Security Systems
! Shipping Recorders
! Appliances
INDUSTRIAL
! Vibration Monitoring
! Vibration Analysis
! Machine Control
! Modal Analysis
! Robotics
! Crash Testing
! Instrumentation
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Silicon Designs, Inc. ! 1445 NW Mall Street, Issaquah, WA 98027-5344 ! Phone: [phone] ! Fax: [phone]
web site: www.silicondesigns.com
[page 1]
Apr 07