092 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Permanent calibration; no service required

092 ^{Barometer Pressure Sensor}
Met One
Instruments, Inc.
1600 Washington Blvd.,
Grants Pass, OR 97526
Tel [phone]
Fax [phone]
[e-mail]
092 Rev. 12/2010
The 092 Barometric Pressure Sensor measures absolute atmospheric pressure and converts
it into a linear, proportional voltage, using digital computer technology.
The 092 features robust, low maintenance construction that will withstand a wide-range of
adverse weather conditions, and consistently collects reliable barometric pressure data.
FEATURES
• Compact size
• Weatherproof enclosure
• Digital and analog outputs
• Permanent calibration; no service required
• Customer configured output
Construction
– The 092 is contained within a small polycarbonate
enclosure with metal weather shield. It may be
mounted outside or inside a building
– Small inlet holes allow the atmospheric pressure
access to the sensing element
Operation
The enclosure of the 092 sensor houses a solid-state
pressure transducer, with linearization and amplifica-
tion instruments, and a low power embedded CPU.
The standard range of the 092 is 600 to 1100 hPa,
which makes it suitable for elevations sea level to
10,000 ft. Other ranges can be configured with DIP
switches on the board of the barometer. The digital
range is always 600 to 1100 hPa.
092 Barometric Pressure Sensor
SPECIFICATIONS
Performance Characteristics
Range:
Elevation:
Resolution:
Temp. Operating Range:
Temp. Compensated Range:
Accuracy:

Long Term Stability:
600 to 1100 hPa (17.72 to 32.48 inch/hg)
Sea level to 10,000 ft. (3048 m)
0.1 hPa
-40°C to 55°C (-40°F to 131°F)
-40°C to 55°C (-40°F to 131°F)
±0.35 hPa @ 20°C (68°F)
±1.0 hPa (±0.03 in Hg) over full range or ±0.5 hPa over any 200 hPa range
±1.0 hPa in 1 year
ELECTRICAL Characteristics
Analog Output:

Digital Output:
Digital Protocol:

Baud Rates:
Power Requirement:
Power Range:
0-1, 0-2, 0-2.5 or 0-5 VDC
(Analog output automatically adjusts from zero to full scale for range selected.)
RS-232, RS-485 & SDI-12
ASCII Terminal Mode
RTU for RS-232 and RS-485.
1200, 2400, 4800, 9600, & 19.2K
10 mA @ 12 VDC, Typical
6-16 VDC
PHYSICAL Characteristics
Weight:
Dimensions:
8.8 oz. (250 g)
4.72 x 3.14 x 2.16 in (120 x 80 x 55 mm)
CABLE
PN 1169
Cable Assembly; specify length in feet or meters
Specifications are subject to change at any time.