07502 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – SOLE GROUNDER

G
B
Developed for and
approved at one of
the world’s largest
contract manufacturers.
E
D
C
F
90P1
LISTED
A
Use proper size and
position sole grounder
under ball of foot.
Per ESD SP9.2 APPENDIX B - Foot Grounder Usage Guidance “Compliance
verification should be performed prior to each use (daily, shift change, etc.). The
accumulation of insulative materials may increase the foot grounder system
resistance. If foot grounders are worn outside the ESD protected area testing for
functionality before reentry to the ESD protected area should be considered.”
Per ANSI/ESD S20.20 Paragraph 6.2.2.2 Personnel Grounding Guidance, “ESD
protective flooring, used with approved footwear, may be used as an alternative to
the wrist strap system for standing operations.”
ESD Handbook TR 20.20 paragraph 5.2.3 “If the contact area between the bottom
of the foot and the floor is not continuous, charge generation may occur especially
when a person is walking. Heel straps must be worn on both feet to minimize the
amount of time that the body of the person is isolated from ground while walking.”
Suitable for ESD footwear component in Flooring - Footwear System personnel
grounding method (<3.5 x 10E7 ohms per ESD STM 97.1). Suitable for ESD
footwear component in flooring - Footwear System personnel grounding method
(<100 volts per ESD STM 97.2).
© 2007 DESCO INDUSTRIES INC.
Employee Owned
Description:
The 07501, 07502 and 07503 Premium Sole Grounders provide a more complete path-
to-ground than regular heel or toe grounders due to a wider and more consistent
contact area. The rubber sole pattern is made from a black conductive outer layer and
a non-marring lining that prevents carbon marks on shoes. These units include a blue
grounding tab with carbon suffused fibers and hook and loop fastening systems. The
Sole Grounders are UL listed. The product has been tested to ESD STM 97.2 - Floor
Materials and Footwear Voltage Measurement in Combination with a Person. It is a
suitable ESD footwear component in Flooring - Footwear System when used as the
primary grounding method (<3.5 x 10E7ohms per ESD STM 97.1 Floor Materials and
Footwear-Resistance Measurement in Combination with a Person.)
Components:
A. 0.080" thick, 1.50" wide, dual layer rubber, black conductive exterior with a non-
marring interior. Tear resistant nylon reinforced 4.3 oz. inner scrim layer prevents
the rubber from tearing.
B. 3/8" wide, 30" long blue polyester tab contains electrically conductive carbon
suffused fibers.
C. 3/4" wide, blue loop material with return hook tip for quick and easy adjustment and
wearer's comfort.
D. 3/4" wide blue elastic material stretches for comfort.
E. Hook and loop fastening system.
F. A 1/4 watt, 2 megohm resistor.
G. Stretch elastic back.
listed for safety and date coded.
Tab to cup resistance:
10E6 Ohms @ 100 volts
RoHS Compliance Statement
None of the following materials are
intentionally added in manufacturing
this product: lead, mercury, cadmium,
hexavalent chromium, polybrominated
biphenyls (PBB) or polybrominated
diphenyl ethers (PBDE) as outlined in
the Directive 2002/95/EC Article 4.1.
See Desco Industries Inc. letter on-
line at Desco.com.
ITEM #
07501
07502
07503
DESCRIPTION
Sole Grounder, 2 megohm resistor, 30" tab - Small
Sole Grounder, 2 megohm resistor, 30" tab - Medium
Sole Grounder, 2 megohm resistor, 30" tab - Large
SHOE SIZE
Women’s 3-7
Women’s 7 - Men’s 10
Men’s 11-15
Notes: Operator is grounded when foot is in contact with grounded dissipative or
conductive flooring. Desco recommends the use of the Desco EMIT Smart Log®,
item 50440.
For additional information on the use and maintenance of foot grounders please
ask for Technical Bulletins TB-2020 and TB-2040.
Made in America
SOLE GROUNDER
DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE [phone] FAX [phone]
DESCO EAST: 90 HUDSON RD, CANTON, MA 02021-1407
PHONE [phone] FAX [phone]
DRAWING NUMBER
07501
DATE:
8/07