06HR-6S-P-N Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 2.5mm pitch/Disconnectable Insulation displacement connectors

HR CONNECTOR
Radial Tape
2.5mm pitch/Disconnectable Insulation displacement connectors
JST ₅
This 2.5mm pitch connector for printed
circuit boards has a thin construction. The
in-line method provides high-density
capability to the end user.
• Twin U-slot insulation displacement section
• Thin design
• High reliability
• Strain relief
• Interchangeability
Specifications –––––––––––––––––––
• Current rating: 2A AC, DC (AWG #24)
• Voltage rating: 250V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/10m Ω max.
After environmental testing/20m Ω max.
• Insulation resistance: 1,000M Ω min.
• Withstanding voltage: 1,000V AC/minute
• Applicable wire: UL1007(Contact JST for details regarding other UL
styles.)
AWG #28, #26, #24
Conductor/7 strands, tin-coated
Insulation O.D./1.0 to 1.5mm
• Applicable PC board thickness: 0.8 to 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
Standards ––––––––––––––––––––––
0 Recognized E60389
1^{Certified LR20812}
2 ^R50082349
PC board layout (viewed from soldering side) and Assembly layout
Top entry type

^ʶ  NJO
Side entry type
 ^ʶ NJO

П
Ê´
ɹ
П
Ê´
ɹ

Top entry type on radial-tape

^ʶ  NJO
П
Ê´
ɹ
Note: 1. Tolerances are non-cumulative: ±0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. If PC boards made of hard material are used, the hole dimensions should be
larger. The dimensions above should serve as a guideline. Contact JST for details.
1