068400 Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – Torque, Angle & Force Analyzer with ARCII Technology

Torque
Analyzers
TorqueLab
LTT Series
Torque, Angle & Force Analyzer
with ARCII Technology
KEY FEATURES
Accuracy 0.5% of reading from 20% to 100% of full scale.
Accuracy 1% of reading from 10% to 20% of full scale.
Recommended for all hand screwdrivers, wrenches, or power tools.
Features a built-in transducer and can connect to an external transducer.
Provides EZ-Plug & Play with Mountz Transducers, Features ARCII
technology, an instant auto-recognition system of the transducer connected
to the LTT.
Selection of six operation modes:
Track, Peak, First Peak, Audit, Spindle Audit, and Torque + Angle
Seven units of torque measurements:
ozf.in, lbf.in, lbf.ft, cN.m, N.m, kgf.m, kgf.cm
Two units of force measurement: lbf and kN
Features built-in Tool Tests operation.
Includes three PC Windows based software programs:
Mountz Torque Meter Interface Program
for sensor calibrations, meter calibration and tool tests.
Torque Meter Bootloader
for updating the LTT operating systems.
Excel Add-In
for Real-Time data collection into an Excel spreadsheet.
It provides statistics calculations.
Flash memory allows upgrades to be done by the user in the field &
internet through the USB port.
Five low-pass filters: 3000, 2000, 1500, 500, and 200Hz
Six-digit display and easy to read menu structure.
Real Time Clock for time stamping of readings.
Model
LTT10i
LTT25i
LTT50i
LTT100i
LTT250i
LTT50F
LTT100F
LTT250F
Item #
068400
068401
068402
068403
068404
068405
068406
068407
American
1 - 10 lbf.in
2.5 - 25 lbf.in
5 - 50 lbf.in
10 - 100 lbf.in
25 - 250 lbf.in
5 - 50 lbf.ft
10 - 100 lbf.ft
25 - 250 lbf.ft
Torque Ranges
S.I.
Metric
11.3 - 113 cN.m 1.2 - 11.5 kgf.cm
28.25 - 282.5 cN.m 2.9 - 28.8 kgf.cm
56.5 - 565 cN.m 5.8 - 57.6 kgf.cm
113 - 1130 cN.m 11.5 - 115 kgf.cm
282.5 - 2825 cN.m 28.8 - 288 kgf.cm
6.8 - 67.8 N.m
0.7 - 6.9 kgf.m
13.56 - 135.6 N.m 1.4 - 13.8 kgf.m
33.9 - 339 N.m 3.5 - 34.5 kgf.m
Drive Size
1/4" F/Sq
1/4" F/Sq
1/4" F/Sq
1/4" F/Sq
1/4" F/Sq
3/8" F/Sq
1/2" F/Sq
1/2" F/Sq
Wt.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
8 lbs.
USB interface to download readings to PC.
High Capacity Li-ion Batteries for long life (30 hours with standard
transducers and 16 hours with brushless rotary).
Can connect to most mv/v transducers and can store calibration data for
up to 50 non-smart torque sensors.
The 5VDC capability allows unit to be used with a Brushless Rotary
Transducer for testing pulse tools and high RPM tools.
Torque and Angle data is displayed simultaneously when used with Torque
and Angle transducers, up to 8000 RPM for angle measurement.
Stores a total of 5000 data points.
Real time graph of torque vs. time using associated PC Windows software.
CABLE CHART _Cable
Transducer
Item #
RTSX-A
072000
All BLRTSX models 072001
BMX
072002
LPX
072003
SDX
072004
RTSX
072005
ETX
072006
LTT
01.3
ACCESSORIES INCLUDED
Universal Charger (100 - 240VAC)
USB Cable
Mountz Software Programs
Run Down Adapter
Case
ACCESSORIES
OPTIONAL
Description
Item #
Charger 100 - 240VAC 770300
USB Cable
770319
Battery Pack
072506
Multiplexer
072998
Bar Code Reader
072997
Mounting Bracket
072608
(for LTT model 10i-50F)
Mounting Bracket
072606
(for all other LTT models)
PLC Interface
072014
Features Go / No Go LEDs that illuminate when high or low setting is
achieved.
PLUG & PLAY
NOTE!
Since a tester cannot always duplicate actual joint
characteristic, the torque reading displayed on the LTT may
vary from the actual torque that a tool will apply to a joint.
When critical assemblies are involved, the torque output of the
power tool being used should be verified on the actual
assembly using a calibrated measuring torque tool.
CERTIFIED
Supplied with NIST-Traceable Certification of Calibration