IMIC9716J Datasheet, PDF (7/12 Pages) List of Unclassifed Manufacturers – 100 MHz Clock Generator with SSCG and Power Management for Mobile Application

C9716J
100 MHz Clock Generator with SSCG and Power Management for Mobile Application
Preliminary
Absolute Maximum Ratings
Voltage Relative to VSS:
Voltage Relative to VDD:
Storage Temperature:
Operating Temperature:
Maximum Power Supply:
-0.3V
0.3V
0ºC to + 125ºC
0ºC to +70ºC
7V
This device contains circuitry to protect the inputs
against damage due to high static voltages or electric
field; however, precautions should be taken to avoid
application of any voltage higher than the maximum
rated voltages to this circuit. For proper operation, Vin
should be constrained to the range:
VSS<(Vin)<VDD
Unused inputs must always be tied to an appropriate
logic voltage level (either VSS or VDD).
DC Parameters
Characteristic
Symbol Min Typ Max
Units
Conditions
Input Low Voltage
VIL
-
-
0.8
Vdc
Input High Voltage
VIH
2.0
-
-
Vdc
Input Low Current
IIL
-66
µA
Input High Current
IIH
5
µA
Output Low Voltage
IOL = 4mA
VOL
-
-
0.4
Vdc
All Outputs (see buffer spec)
Output High Voltage
IOH = 4mA
VOH 2.4
-
-
Vdc
All Outputs Using 3.3V Power
(see buffer spec)
Tri-State leakage Current
Ioz
-
-
10
µA
Dynamic Supply Current
(2.5 Volt Supply)
Dynamic Supply Current
(3.3 Volt Supply)
Power Down Mode
Power Down Mode
Idd2₆₆
-
Idd2₁₀₀
-
Idd3₆₆
-
Idd3₁₀₀
-
I2.5_PD
-
I3.3_PD
-
-
35
mA
-
45
mA
-
100
mA
-
120
mA
- 200 uA
mA
- 100 uA
mA
TS# = 1, 100/66 = 0, CS# = 1
TS# = 1, 100/66 = 0, CS# = 1
TS# = 1, 100/66 = 1, CS# = 1
TS# = 1, 100/66 = 1, CS# = 1
PD# at logic low level
PD# at logic low level
VDD = VDDF = VDDP=VDDR =3.3V ±5%, VDDC = 2.5V ±5%,, TA = 0ºC to +70ºC
INTERNATIONAL MICROCIRCUITS, INC. 525 LOS COCHES ST.
MILPITAS, CA 95035 TEL: [phone] ext. 275 FAX [phone]
Rev. 1.0
4/28/2000
Page 7 of 12