PEM119020 Datasheet, PDF (6/8 Pages) List of Unclassifed Manufacturers – Engineering Demonstrator

PEM119020 Series | Engineering Demonstrator
Reflow Soldering Profile
Figure 5. Reflow soldering profile
1. Reflow soldering should not be done more than twice
2. When soldering, do not put stress on the LEDs during heating
Soldering iron
1. When hand soldering, the temperature of the iron must be ≤+300ºC for 3 seconds
2. Hand soldering should be performed only once.
Handling Instructions
Plessey LEDs are not designed to operate with reverse bias.
Precautions are required to prevent reverse bias in applications and during handling.
Moisture Sensitivity
JEDEC Level
4
Floor Life
Time
Conditions
72 hours
≤+30^oC / 60% RH
Bake
Time
Conditions
≥24 hours
+125^oC ±5^oC
Datasheet No 292406 Issue 2
Page 6 of 8
04/07/2014