NT511740D5J Datasheet, PDF (6/16 Pages) List of Unclassifed Manufacturers – CMOS with Extended Data Out

NT511740D5J
16MEG : x4
CMOS with Extended Data Out
DC CHARACTERISTICS ( Continued )
Symbol
ICC1
ICC2
ICC3
ICC4
ICC5
ICC6
ICC7
ICCS
Power
Don’t care
Normal
L
Don’t care
Don’t care
Normal
L
Don’t care
L
L
Speed
-5
-6
Don’t care
-5
-6
-5
-6
Don’t care
-5
-6
Don’t care
Don’t care
Max
Units
110
mA
100
mA
2
mA
1
mA
110
mA
100
mA
90
mA
80
mA
3
mA
200
uA
110
mA
100
mA
300
uA
250
uA
ICC1* : Operating Current ( RAS and CAS cycling @ t _RC=min.)
ICC2 : Standby Current ( RAS = CAS = W =V_IH)
ICC3* : RAS -only Refresh Current ( RAS =V_IH, RAS cycling @ t _RC=min.)
ICC4* : Hyper Page Mode Current ( RAS =V_IL, CAS Address cycling @ t _HPC=min.)
ICC5 : Standby Current ( RAS = CAS = W =V_CC-0.2V)
ICC6* : CAS-Before- RAS Refresh Current ( RAS , CAS cycling @ t _RC=min.)
ICC7 : Battery back-up current, Average power supply current, Battery back-up mode Input high voltage (V_IH)=VCC-0.2V,
Input low voltage (V_IL)=0.2V, CAS =0.2V, DQ=Don’t care, t _RC=125us(2K/L-ver) , t _RAS=t_RASmin~300ns
ICCS : Self Refresh Current
( RAS = CAS =0.2V, W = OE =A0 ~ A11=VCC-0.2V or 0.2V, DQ0 ~ DQ3=VCC-0.2V, 0.2V or open )
*Note : ICC1, ICC3, ICC4 and ICC6 are dependent on output loading and cycle rates. Specified values are obtained with
the output open. ICC is specified as an average current. In ICC1, ICC3 and ICC6, address can be changed
maximum once while RAS =V_IL. In ICC4, address can be changed maximum once within one hyper page mode
cycle time, t _HPC.
REV 1.0 May. 2000
6
© NANYA TECHNOLOGY CORP.
NAYNA TECHNOLOGY CORP. reserves the right to change products and specifications without notice.