SMD2920 Datasheet, PDF (5/8 Pages) List of Unclassifed Manufacturers – Surface Mount PTC Devices

TM
SMD2920 Surface Mount PTC Devices R.O.C. Patent#415624
FIGURE
SOLDER PAD LAYOUTS
PHYSICAL DIMENSIONS (mm)
Part Number
SMD2920P030TS
SMD2920P050TS
SMD2920P075TS
SMD2920P100TS
SMD2920P125TS
SMD2920P150TS
SMD2920P185TS
SMD2920P200TS
SMD2920P250TS
SMD2920P260TS
SMD2920P300TS
SMD2920P300TS/15
A
B
C
D
Min. Max. Min. Max. Min. Max. Min.
6.73 7.98 4.80 5.44 0.75 1.25 0.30
6.73 7.98 4.80 5.44 0.75 1.25 0.30
6.73 7.98 4.80 5.44 0.75 1.25 0.30
6.73 7.98 4.80 5.44 0.55 1.00 0.30
6.73 7.98 4.80 5.44 0.55 1.00 0.30
6.73 7.98 4.80 5.44 0.75 1.25 0.30
6.73 7.98 4.80 5.44 0.75 1.25 0.30
6.73 7.98 4.80 5.44 0.75 1.25 0.30
6.73 7.98 4.80 5.44 0.75 1.25 0.30
6.73 7.98 4.80 5.44 0.55 1.00 0.30
6.73 7.98 4.80 5.44 0.75 1.25 0.30
6.73 7.98 4.80 5.44 0.75 1.25 0.30
E
Min. Max.
0.25 2.00
0.25 2.00
0.25 2.00
0.25 2.00
0.25 2.00
0.25 2.00
0.25 2.00
0.25 2.00
0.25 2.00
0.25 2.00
0.25 2.00
0.25 2.00
ENVIRONMENTAL SPECIFICATIONS
Operating/Storage
Temperature
Maximum Device Surface
Temperature in Tripped State
Passive Aging
Humidity Aging
Thermal Shock
Solvent Resistance
Vibration
-40 to +85
125
+85 , 1000 hours
+85 , 85%R.H. 1000 hours
MIL-STD-202 Method 107G
+85 /-40 20 times
MIL-STD-202, Method 215
MIL-STD-883C, Method 2007.1, Condition A
±5% typical resistance change
±5% typical resistance change
-30% typical resistance change
No change
No change
PHYSICAL SPECIFICATIONS
Terminal Material
Lead Solderability
Packaging
Solder-Plated Copper (Solder Material: 63/37 SnPb)
Meets EIA Specification RS186-9E, ANSI/J-STD-002 Category 3.
16 mm tape on 7 inch reel per EIA-481-1 (equivalent to IEC286, part 3)
2000 devices per reel for P100TS, P125TS &P260
others : 1500 devices per reel
Specifications are subject to change without notice.
111