920-349D-LR-3980 Datasheet, PDF (4/5 Pages) List of Unclassifed Manufacturers – Thermometrics Clip-On Pipe and Surface Sensors

Type JC
Specifications
Silistor Data
Code: JC202SLN1/X
Measurements made at 1 mA
77°F (25°C)
Resistance Ω 1980 – 2020
140°F (60°C)
2577.1 – 2641.3
185°F (85°C)
3024.2 – 3146.5
Temperature ±2.29°F (±1.27°C) ±4.10°F (±2.28°C) ±5.4°F (±3.0°C)
Deviation
0.394 in (10 mm)
0.197 in
(5 mm)
Housing length
(along pipe) = 0.63 in (16 mm)
Housing
Tab 0.11 in (2.8 mm) X (0.02 in) 0.5 mm
0.7 in (17.8 mm)
PRT Data
• Tolerance: Class A
• Code: JC102PRTA/X
Refer to separate tables for RvT
Resistance Ω
Temperature
Deviation
32°F (0°C) 77°F (25°C) 140°F (60°C)
1000
±0.27°F
(±0.15°C)
1097
±0.36°F
(±0.2°C)
1232
±0.49°F
(±0.27°C)
185°F (85°C)
1328
±0.58°F
(±0.32°C)
Shoe
Clip
Ordering Information
The code number to be ordered may be specified as follows:
Code Type
JC Clip-On Pipe Sensor
Code Type
X
NTC (See NTC Data Table on page 3)

PTC (See PTC Data Table on page 3)

SLN (See Silistor Data Table)

PRT (See PRT Data Table)

Code Pipe Diameter Range in mm

13 13 - 15

17 17 - 18.5

20 20 - 22

26 26 - 27.5

28 28 - 30

F
Flat Surface
JC - ____ - ____ Typical model number

Clip Size is specified in the codes above as shown in the table
on the top.
www.ge-mcs.com
920-349D
© 2011 General Electric Company. All Rights Reserved. Specifications are subject to change without notice. GE is a registered trademark of General Electric Company. Other company or product
names mentioned in this document may be trademarks or registered trademarks of their respective companies, which are not affiliated with GE.