RTL8309SB Datasheet, PDF (37/115 Pages) List of Unclassifed Manufacturers – SINGLE-CHIP 9-PORT 10/100MBPS SWITCH CONTROLLER

RTL8309SB
Datasheet
6.2.6. IP Address
Name
Byte.bit
IP Address [A]
[16:23]
16.7~
16.0
IP Address [A]
[31:24]
17.7~
17.0
IP Address [A]
[7:0]
18.7~
18.0
IP Address [A]
[15:8]
19.7~
19.0
IP Address [B]
[16:23]
20.7~
20.0
IP Address [B]
[31:24]
21.7~
21.0
IP Address [B]
[7:0]
22.7~
22.0
IP Address [B]
[15:8]
23.7~
23.0
Table 22. IP Address
Description
IP Address [A]
If IP priority for IP address [A] is enabled, the switch will compare the
source IP address of an incoming packet against the value, IP address [A]
AND IP mask [A], to classify priority for the packet.
IP Address [A]
If IP priority for IP address [A] is enabled, the switch will compare the
source IP address of an incoming packet against the value, IP address [A]
AND IP mask [A], to classify priority for the packet.
IP Address [A]
If IP priority for IP address [A] is enabled, the switch will compare the
source IP address of an incoming packet against the value, IP address [A]
AND IP mask [A], to classify priority for the packet.
IP Address [A]
If IP priority for IP address [A] is enabled, the switch will compare the
source IP address of an incoming packet against the value, IP address [A]
AND IP mask [A], to classify priority for the packet.
IP Address [B]
If IP priority for IP address [B] is enabled, the switch will compare the
source IP address of an incoming packet against the value, IP address [B]
AND IP mask [B], to classify priority for the packet.
IP Address [B]
If IP priority for IP address [B] is enabled, the switch will compare the
source IP address of an incoming packet against the value, IP address [B]
AND IP mask [B], to classify priority for the packet.
IP Address [B]
If IP priority for IP address [B] is enabled, the switch will compare the
source IP address of an incoming packet against the value, IP address [B]
AND IP mask [B], to classify priority for the packet.
IP Address [B]
If IP priority for IP address [B] is enabled, the switch will compare the
source IP address of an incoming packet against the value, IP address [B]
AND IP mask [B], to classify priority for the packet.
Default
0xff
0xff
0xff
0xff
0xff
0xff
0xff
0xff
Single-chip 9-port 10/100Mbps Switch Controller
22
Track ID: JATR-1076-21 Rev. 1.4