RJ-032 Datasheet, PDF (3/3 Pages) List of Unclassifed Manufacturers – Single 10/100 BASE-TX Filtered Connector Module

NUMBER:RD-SDRJ-032
DATE : 2003/04/08 -C(REV:1)
Requirements
1.Design and Construction
Product shall be of design, construction and physical dimensions specified on
applicable product drawing.
2.Materials and Finish
A. Contact:
RJ Contact : Phosphor Bronze, Thickness=0.30mm
Finish : (a) Contact Area : 30µ”min. Gold
(b) Solder tail Area : 100µ”min. Tin/Lead(9:1)
(c) Under plating : 50µ”min. Nickel over all
RJ Joint Contact : Brass, Thickness=0.35mm
Finish : 100µ”min. Tin/Lead(9:1) over 50µ”min. Nickel
B. Plastic Part :
(1) Set Housing : Thermoplastic, PBT, Black
UL FILE NO. : E130155
Manufacturer : NAN YA PLASTICS CORP.
Grade :1403G3
Flame Class : UL 94V-0
(2) Insert : Thermoplastic, PBT, Black
UL FILE NO. : E130155
Manufacturer : MITSUI Petrochemical Industries
Grade : CH230N
Flame Class : UL 94V-0
(3) Spacer : Thermoplastic, PBT, Black
UL FILE NO. : E130155
Manufacturer : NAN YA PLASTICS CORP.
Grade : 1403G3
Flame Class : UL 94V-0
C. Shield Material :
Cartridge t=0.25mm
10µ”-20µ” Thick Nickel over 10µ”-20µ” min Thick Nickel
3. Ratings
(1) Voltage rating : 125 VAC
(2) Current rating : 1.5A
Durability :
1000 cycles with no function damage for RJ-45 . Abnormalities shall be
present after the test.
Low Level Contact Resistance : ∆R=300mΩ maximum (final)
The sample should be mounted in the tester and fully mated and unmated
500 times per hour at the rate of 25mm/min.
EIA-364-09C.
Taimag USA
55 Charles Drive Tewksbury Ma 01876
tel: [phone] fax: [phone] http://www.Taimagusa.com