CHS-06TA1 Datasheet, PDF (3/15 Pages) List of Unclassifed Manufacturers – SURFACE MOUNT TYPE SLIDE SWITCHES

COPAL ELECTRONICS
CHS
SLIDE SWITCHES (SMD)
s STANDARD SPECIFICATIONS
Operating temp. range
− 40 ~ +85 °C
Sealing
Net weight
Washable by seal tape
Approx. 0.05 g (CHS-01) Approx. 0.08 g (CHS-02)
Approx. 0.12 g (CHS-04) Approx. 0.17 g (CHS-06))
Approx. 0.22 g (CHS-08) Approx. 0.25 g (CHS-10)
s ELECTRICAL CHARACTERISTICS
Contact rating
Non-switching
Switching
Minimum
DC50 V, 100 mA
DC6 V, 100 mA DC24 V, 25 mA
DC20 mV, 1 µA
Contact resistance
50 mΩ maximum (1.5 mA, 1 kHz, 20 mV)
Insulation resistance
1000 MΩ (DC100 V) minimum
Dielectric strength
AC500 V, 50 Hz, 60 s
s MECHANICAL CHARACTERISTICS
Operating force
Stop strength
Solderability
Soldering heat
Shear (Adhesion)
Substrate bending
Pull-off strength
0.5 ~ 5 N {0.05 ~ 0.51 kgf}
10 N {1.02 kgf}, 60 s
235 ± 5 °C, 2 ± 0.5 s
240 °C (VPS method), 30 s
5 N {0.51 kgf} 10 s
Width 90 mm, bend 3 mm,
5 s, 1 time
5 N {0.51 kgf} 10 s
{ } : Reference only
s ENVIRONMENTAL CHARACTERISTICS
Vibration
Shock
Load life
Humidity
High temp. exposure
Amplitude of 1.5 mm (p-p) or Acceleration of 98 m/s²,
10-500 Hz, 3 directions for 10 cycles each
490 m/s², 11 ms
6 directions for 3 times each
Continuous load 2000 cycles,
DC6 ± 0.5 V, 100 ± 10 mA
−10 ~ +65 °C, 0 ~ 96 %RH,
24 h for 10 cycles
85 °C, 96 h
Low temp. exposure
Thermal shock
−40 °C, 96 h
−40 (0.5 h) ~ +85 °C (0.5 h),
5 cycles
s Specifications are subject to change without notice. Specifications in this catalog are for reference. The formal specification sheets will be submitted upon request.