|
GDM240128A Datasheet, PDF (24/29 Pages) List of Unclassifed Manufacturers – LCD MODULE | |||
|
◁ |
Userâs Manual
6. Quality level
6-1. Inspection conditions
6-1-1. The environmental conditions for inspection shall be as follows:
Room temperature: 20±3â
Humidity: 65±20% RH
6-1-2. The external visual inspection:
Using a 20W fluorescent lamp for illumination shall perform the inspection.
The distance between LCD and the inspectorâs eyes should be at least 30cm.
6-1-3. (1) Light method
(2) Inspection distance and angle
6-2. Sampling procedures for each itemâs acceptance level table
Defect type
Major defect
Minor defect
Sampling procedure
MIL-STD-105D Inspection Level I
Normal inspection
Single sample inspection
MIL-STD-105D Inspection Level I
Normal inspection
Single sample inspection
- 23 -
AQL
Q/ED-01-98(II)
Q/ED-01-98(II)
|
▷ |