RFP-250250-4AA Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – Surface Mount Attenuators 8 Watts

Model RFP-250250-4AAXX
Specifications
PART NUMBER ATTENUATION (dB)TOL. (+/-dB) WIDTH LENGTH THK POWER (WATTS) VSWR FREQ.(GHz)
RFP-250250-4AA1
1
0.30
0.25 0.25 0.04
8
1.20:1
2.5
RFP-250250-4AA2
2
0.40
0.25 0.25 0.04
8
1.20:1
2.5
RFP-250250-4AA3
3
0.40
0.25 0.25 0.04
8
1.20:1
2.5
RFP-250250-4AA4
4
0.40
0.25 0.25 0.04
8
1.20:1
2.5
RFP-250250-4AA5
5
0.40
0.25 0.25 0.04
8
1.25:1
2.5
RFP-250250-4AA6
6
0.40
0.25 0.25 0.04
8
1.30:1
2.5
RFP-250250-4AA9
9
0.40
0.25 0.25 0.04
8
1.30:1
2.5
RFP-250250-4AA10 10
0.40
0.25 0.25 0.04
8
1.30:1
2.5
RFP-250250-4AA20 20
0.75
0.25 0.25 0.04
8
1.25:1
2.5
RFP-250250-4AA30 30
1.50
0.25 0.25 0.04
8
1.20:1
2.0
Power Derating
Suggested Mounting Procedures
100
75
50
25
0
25
50
75
100 125
150
P.C.B. SOLDER INTERFACE TEMPERATURE — °C
SOLDER
PASTE
SOLDER
PASTE
PC BOARD
HEATSINK
SCREW
(2 PLS.)
SOLDER
FILLED VIA
1. Solder part in place using 60/40 type solder with controlled
temperature iron (700°F).
2. Drill thermal vias through PCB and fill with solder, such as
60/40 type.
3. To ensure good thermal connectivity to heat sink, drill and
tap heatsink and mount PCB board to heat sink using
screws.
Available on Tape and Reel for Pick and Place Manufacturing.
2
Sales Desk USA: Voice: [phone] Fax: [phone]
Sales Desk Europe: Voice: ([phone] Fax: [phone]