LEDRS75N Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – LED Highly-Diffused Lights (75 mm)

LED Highly-Diffused Lights (75 mm)
Accessories
Continuous Power Supplies
Models
PSA-12
PSA-12E
PSC-24^†
PSC-24E^†
Input
Input
Cord
Output
100-250V ac
50/60 Hz
North America
(NEMA 5-15)
Cont. Europe
(Schuko CEE 7)
12V dc ±5%
with voltage
regulation of ±1%
3.5 A max.
100-250V ac
50/60 Hz
North America
(NEMA 5-15)
Cont. Europe
(Schuko CEE 7)
24V dc ±5%
with voltage
regulation of ±1%
2.2 A max.
Output
Cable
1.8 m (6')
Terminated with
9-pin D-sub
connector
(female pins)
1.8 m (6')
2-wire
Unterminated
Used with
Continuous types:
LEDRS75N
LEDGS75N
SCM Strobe
Control Module
(see below)
Variable Power Supplies (see data sheet p/n 67449)
Models
PS2V-12^†
PS2V-12E^†
Input
100-140V ac
60 Hz
200-250V ac
50 Hz
Input
Cord
North America
(NEMA 5-15)
Cont. Europe
(Schuko CEE 7)
Output
2-channels
6 - 12V dc
2 A max. per
channel
Output
Cable
1.8 m (6')
Terminated with
9-pin D-sub
connector
(female pins)
Used with
Continuous types:
LEDRS75N
LEDGS75N
Strobe Control Module (see data sheet p/n 67448)
Models
Input
SCM^†
24V dc ±5%
2 A max.
(Use Power Supply PSC-24
or PSC-24E)
Trigger Input
Output
Output
Pulse Range Used with
5 - 12V dc pulse
rising or falling
(switch selectable)
10 mA max.
2-channels
24V dc ±5%
9 A nominal per
channel @ 60 Hz
5 to 1,300
microseconds
Strobed types:
LEDRS75N-S
Extension Cables
Models
Length
Configuration
DB906^†
DB910^†
1.8 m (6') _{Terminated both ends with 9-pin D-sub connector, for continuous lights}
3.0 m (10') ^{(one end male pins and opposite end female pins)}
DB9Y^†
1.8 m (6') Y cable for powering 2 lights from one supply, for continuous lights
DB906S^†
DB910S^†
1.8 m (6') _{Terminated both ends with 9-pin D-sub connector, for strobed lights}
3.0 m (10') ^{(one end male pins and opposite end female pins)}
DB9YS^†
1.8 m (6') Y cable for powering 2 lights from one supply, for strobed lights
† _{These models are not stocked and are non-returnable.}
Used with
Continuous types:
LEDRS75N
LEDGS75N
Strobed types:
LEDRS75N-S
Banner Engineering Corp., 9714 Tenth Ave. No., Mpls., MN 55441 • Ph: 763.544.3164 • www.bannerengineering.com • Email: [e-mail]