HPV-DV-1A Datasheet, PDF (2/2 Pages) Cooper Bussmann, Inc. – Single-pole, non-serviceable in-line PV fuse holder and fuse assembly

Technical Data 2157
Effective December 2015
Single-pole, non-serviceable in-line PV fuse holder and fuse assembly
— 1000Vdc, 1-20A
Dimensions - mm:
Inner insulating boot
11.1±0.7
13.1±1.0
29.0±1.0
56.9±1.0
Outer insulating boot
89.5±1.0
13.1±1.0
27.6±1.0
(135 ref.)
15.2±0.7
Fuse element
(76.00 ref.)
Catalog number system:
Series
HPV
(13.3 ref.)
Estimated total length
after fully assembled
HPV - DV - XXA
Voltage
DV = DC Voltage
Amps
XX = 1, 2, 2.5, 3, 3.5, 4,
5, 6, 8, 10, 12, 15, 20
The only controlled copy of this data sheet is the electronic read-only version located on the Eaton network drive. All other copies of this
document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical
information that will help the end user with design applications. Eaton reserves the right, without notice, to change design or construction
of any products and to discontinue or limit distribution of any products. Eaton also reserves the right to change or update, without notice,
any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible
applications.
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
Eaton.com/bussmannseries
© 2015 Eaton
All Rights Reserved
Printed in USA
Publication No. 2157 – BU-SB121079
December 2015
Eaton and Bussmann are valuable
trademarks of Eaton in the US and other
countries. You are not permitted to use the
Eaton trademarks without prior written
consent of Eaton.
CSA is a registered trademark of the
Canadian Standards Group.
Sta-Kon is a registered trademark of
Thomas & Betts
UL is a registered trademark of
Underwriters Laboratories, Inc.
For Eaton’s Bussmann series
product information,
call 1-855-287-7626 or visit:
Eaton.com/bussmannseries
Follow us on social media to get the
latest product and support information.