English
Language : 

GW5329 Datasheet, PDF (2/2 Pages) List of Unclassifed Manufacturers – GW5329
GW
5.Performance
5-1.Maximum Rating
SAW Filter
Rating
Input Power Level
DC Voltage
Storage Temperature
5-2.Electronic Characteristics
GW5329
Value
10
12V
-40 to +85
Units
dBm
VDC
ć
Characteristic
Center Frequency
(center frequency between 3dB points)
Insertion Loss
3dB Passband
Rejection
at fc -21.4MHz(Image)
at fc -10.7MHz(LO)
Ultimate
Operating Case Temperature
Turnover Temperature
Temperature
Turnover Frequency
Frequency Temperature Coefficient
fc
IL
BW3
Tc
To
fo
FTC
Frequency Aging Absolute Value during the First Year |fA|
Min.
--
40
15
--
-35
24
Typ. Max. Units
429.82
MHz
3.5
600
50
30
80
39
fc
0.032
10
5.0
dB
kHz
--
--
dB
--
+85
ć
54
MHz
ppm/ć2
ppm/yr
NOTES:
1. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50 ohms
test system with VSWRÄ°1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fc. Note that
insertion loss and bandwidth and passband shape are dependent on the impedance matching component values and quality.
2. The frequency fc is defined as the midpoint between the 3dB frequencies.
3. Where noted specifications apply over the entire specified operating temperature range.
4. The turnover temperature, TO, is the temperature of maximum (or turnover) frequency, fo. The nominal frequency at any case temperature,
Tc, may be calculated from: f = fo [1 - FTC (To - Tc)2].
5. Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged
temperatures above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
6. The design, manufacturing process, and specifications of this device are subject to change without notice.
7. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
Address:NO.120 Bldg,Jindi Industrial Estate,Futian District,Shenzhen,China. Tel:(86)755-26161582 Fax:(86)755-755-26160182 E-mail:guanwi@guanwi.com