FS6131-01 Datasheet, PDF (17/39 Pages) List of Unclassifed Manufacturers – Programmable Line Lock Clock Generator IC

FS6131-01
Programmable Line Lock Clock Generator IC
Table 14: DC Electrical Specifications
Unless otherwise stated, VDD = 5.0V ± 10%, no load on any output, and ambient temperature range TA = 0°C to 70°C. Parameters denoted with an asterisk ( * ) represent nominal characterization
data and are not production tested to any specific limits. MIN and MAX characterization data are ± 3σ from typical. Negative currents indicate current flows out of the device.
PARAMETER
SYMBOL
CONDITIONS/DESCRIPTION
MIN.
TYP. MAX. UNITS
Overall
Supply Current, Dynamic,
(with Loaded Outputs)
Supply Current, Static
Serial Communication I/O (SDA, SCL)
High-Level Input Voltage
Low-Level Input Voltage
Hysteresis Voltage *
Input Leakage Current
Low-Level Output Sink Current (SDA)
Tristate Output Current
Address Select Input (ADDR)
High-Level Input Voltage
Low-Level Input Voltage
High-Level Input Current (pull-down)
Low-Level Input Current
Reference Frequency Input (REF, FBK)
High-Level Input Voltage
Low-Level Input Voltage
Hysteresis Voltage
Input Leakage Current
Loop Filter Input (EXTLF)
Input Leakage Current
High-Level Output Source Current
Low-Level Output Sink Current
Crystal Oscillator Input (XIN)
Threshold Bias Voltage
High-Level Input Current
Low-Level Input Current
Crystal Loading Capacitance *
Input Loading Capacitance *
IDD
fCLK = 66MHz; CMOS Mode, VDD = 5.5V
100
mA
IDDL
SHUT = 1, XLROM[2:0] = 7, XLPDEN = 1
VDD = 5.5V
12
mA
VIH
Outputs off
VIL
Outputs off
Vhys
Outputs off
II
IOL
VOL = 0.4V
IZ
3.5
VDD+0.3
V
VSS-0.3
1.5
V
2
V
-1
1
µA
20
32
mA
-10
10
µA
VIH
VIL
IIH
VIH = VDD = 5.5V
IIL
2.4
VDD+0.3
V
VSS-0.3
0.8
V
5
16
30
µA
-2
2
µA
VIH
3.5
VDD+0.3
V
VIL
VSS-0.3
1.5
V
Vhys
500
mV
II
-1
1
µA
II
EXTLF = 0
VO = 0.8V; EXTLF =1, MLCP[1:0] = 0
VO = 0.8V; EXTLF =1, MLCP[1:0] = 1
IOH
VO = 0.8V; EXTLF =1, MLCP[1:0] = 2
VO = 0.8V; EXTLF =1, MLCP[1:0] = 3
VO = 4.2V; EXTLF =1, MLCP[1:0] = 0
VO = 4.2V; EXTLF =1, MLCP[1:0] = 1
IOL
VO = 4.2V; EXTLF =1, MLCP[1:0] = 2
VO = 4.2V; EXTLF =1, MLCP[1:0] = 3
-1
1
µA
-1.5
-5
µA
-8
-24
1.5
5
µA
8
25
VTH
1.5
2.2
3.5
V
IIH
Outputs off; VIH = 5V
10
24
30
mA
IIL
Outputs off; VIL = 0V
-10
-19
-30
mA
CL(xtal)
As seen by an external crystal connected
to XIN and XOUT; VCXO tuning disabled
10
pF
CL(XIN)
As seen by an external clock driver on
XOUT; XIN unconnected; VCXO disabled
20
pF
17