XE5692H Datasheet, PDF (13/22 Pages) List of Unclassifed Manufacturers – Half-Size, Low-Cost Global Embedded Modem

XE5692H AT Commands
Vn - Result Codes -
n=0 Numeric Result Codes
n=1 English Word Result Codes*
Xn - Result Code Set -
n=0 Responses 0-4
n=1 Responses 0-5 & 10
n=2 Responses 0-6 & 10
n=3 Responses 0-5, 7 & 10
n=4 Responses 0-8 & 10*
n=5 All Responses
Z - Reset -
&Gn - Maximum Data Rate Selection
n=3 1200 bps
n=4 2400 bps
n=5 4800 bps
n=6 7200 bps
n=7 9600 bps
n=8 12,000 bps
n=9 14,400 bps
n=10 16,800 bps
n=11 19,200 bps
n=12 21,600 bps
n=13 24,000 bps
n=14 26,400 bps
n=15 28,800 bps
n=16 31,200 bps
n=17 33,600 bps *
&Hn - Protocol Selection
n=0 V.90 with auto fallback to 300 bps *
n=1 V.90 with fallback to 28,800 bps
n=2 V.34 with automatic fall back to 300 bps
n=3 V.34 only (33,600 bps to 2400 bps)
n=4 V.32bis w automatic fallback to 300 bps
n=5 V.32bis only (14,400 to 4800 bps)
n=6 V.22bis (2400 or 1200 bps) *
n=7 V.22 (1200 bps)
n=8 Bell 212 (1200 bps)
n=9 Bell 103 (300 bps)
n=10 V.21 (300 bps)
n=11 V.23 (1200/75 bps)
&$ - Display current AT& settings.
&Tn - Modem Test Modes
n=0 Cancel Test Mode
n=3 Initiate Analog Loopback
&Z - Sleep Mode; wake on incoming Ring
%B - Report Blacklisted Numbers
%C - V.42bis Data Compression
n=0 Data Compression Disabled *
n=1 Bidirectional Data Compression Enabled
n=2 Data Compression Transmit Only
n=3 Data Compression Receive Only
%On -Answer Mode
n=1 Answer in Answer Mode *
n=2 Answer in Originate Mode
%Vn - Shared Line Use
n=0 No auto detection of local line status *
n=2 Check line voltage before going off-hook.
“NO LINE” response if line is unavailable
and “LINE IN USE” if line is off hook.
%$ - Display current AT% settings.
\Bn - Character Length
n=0 6N1; 6 data bits, no parity, 1 stop bit
n=1 7N1; 7 data bits, no parity, 1 stop bit
n=2 7P1; 7 data bits, 1 stop bit, parity set by
AT\P command.
n=3 8N1; 8 data bits, no parity, 1 stop bit, *
n=5 8P1; 8 data bits, 1 stop bit, parity set by
AT\P command.
n=6 8X1; 8 data bits, 1 stop bit, 1 escape bit
enabling 9th bit escape mode.
\Nn - Error Control Mode
n=0 Normal Mode
n=2 MNP Required
n=3 V.42 auto reliable mode *
n=4 LAPM required for connection
n=5 V.42 or MNP required
\Pn - Parity Setting
n=0 Even Parity selected *
n=1 Space Parity selected
n=2 Odd Parity selected
n=3 mark Parity selected
XECOM
(13)
XE5692H