THAT1206 Datasheet, PDF (10/10 Pages) List of Unclassifed Manufacturers – InGenius High-CMRR Balanced Input Line Receiver

Page 10
InGenius Balanced Line Receiver
Preliminary Information
Package Information
The THAT 1200 series is available in both 8-pin
mini-DIP and 16-pin SOIC packages. The package
dimensions are shown in Figures 13 and 14, while
pinouts are given in Table 1.
BC
J
1
A
G
K
F
H
D
E
ITEM
A
B
C
D
E
F
G
H
J
K
MILLIMETERS
9.52±0.10
6.35±0.10
7.49/8.13
0.46
2.54
3.68/4.32
0.25
3.18±0.10
8.13/9.40
3.30±0.10
INCHES
0.375±0.004
0.250±0.004
0.295/0.320
0.018
0.100
0.145/0.170
0.010
0.125±0.004
0.320/0.370
0.130±0.004
Figure 13. -P (DIP) version package outline drawing
E
F
1
D
A
BC
H
G
J
ITEM
A
B
C
D
E
F
G
H
J
MILLIMETERS
10.11/10.31
7.40/7.60
10.11/10.51
0.36/0.46
1.27
2.44/2.64
0.23/0.32
0.51/1.01
0.10/0.30
INCHES
0.398/O.406
0.291/0.299
0.398/0.414
0.014/0.018
0.050
0.096/0.104
0.009/0.013
0.020/0.040
0.004/0.012
Figure 14. -S (SO) version package outline drawing
Information furnished by THAT Corporation is believed to be accurate and reliable. However no responsibil-
ity is assumed by THAT Corporation for its use nor for any infringements of patents or other rights of third par-
ties which may result from its use.
LIFE SUPPORT POLICY
THAT Corporation products are not designed for use in life support equipment where malfunction of such
products can reasonably be expected to result in personal injury or death. The buyer uses or sells such prod-
ucts for life suport application at the buyer’s own risk and agrees to hold harmless THAT Corporation from all
damages, claims, suits or expense resulting from such use.
CAUTION: THIS IS AN ESD (ELECTROSTATIC DISCHARGE) SENSITIVE DEVICE.
It can be damaged by the currents generated by electrostatic discharge. Static charge and therefore danger-
ous voltages can accumulate and discharge without detection causing a loss of function or performance to occur.
The transistors in this device are unprotected in order to maximize performance and flexibility. They are
more sensitive to ESD damage than many other ICs which include protection devices at their inputs.
Use ESD preventative measures when storing and handling this device. Unused devices should be stored in
conductive packaging. Packaging should be discharged before the devices are removed. ESD damage can occur
to these devices even after they are installed in a board-level assembly. Circuits should include specific and ap-
propriate ESD protection.
THAT Corporation; 45 Sumner Street; Milford, Massachusetts 01757-1656; USA
Tel: [phone]; Fax: [phone]; Web: www.thatcorp.com