ICM105B Datasheet, PDF (10/17 Pages) List of Unclassifed Manufacturers – Color VGA CMOS Image Sensor

ICM105B VGA CMOS sensor
Data Sheet V1.6, August 2002
0x95
0x96
0x97
0x98
0x99
0x9A
0x9B
0x9C
0x9F
0xA0
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
0xAB
0xAC
0xAD
0xAE
0xAF
0xB0
0xB1
0xB6
0xB7
0xB8
0xB9
0xBA
0xBB
0xBC
0xBD
0xBE
0xBF
AD_SLOPE_END_TIMEL
AD_SLOPE_END_TIMEH
AD_WT_BEGINL
AD_WT_BEGINH
AD_WT_ENDL
AD_WT_ENDH
AD_SUB_EN_TIMEL
AD_SUB_EN_TIMEH
AD_EXPOSE_TIMEL_C
AD_EXPOSE_TIMEH_C
AD_WIDTHL_C
AD_WIDTHH_C
AD_HEIGHTL_C
AD_HEIGHTH_C
AD_COL_BEGINL_C
AD_COL_BEGINH_C
AD_ROW_BEGINL_C
AD_ROW_BEGINH_C
AD_HSYNC_ENDL_C
AD_HSYNC_ENDH_C
AD_VSYNC_ENDL_C
AD_VSYNC_ENDH_C
AD_PART_CONTROL_C
AD_WT_BEGINL_C
AD_WT_BEGINH_C
AD_WT_ENDL_C
AD_WT_ENDH_C
AD_F_MAX_ADDRL
AD_F_MAX_ADDRH
AD_F_OVERL
AD_F_OVERH
AD_F_LIMITAL
AD_F_LIMITAH
0x02A9
(681)
0
0x03FC
(1020)
0x02F8
(760)
0x0207
(519)
0x0302
(770)
0x0208
(520)
0x0064
(100)
0x000A
(10)
0x0040
(64)
0x0003
(3)
0
0
0x03FC
(1020)
0x01E9
(489)
0x01EA
(490)
0x01EB
(491)
AD_F_LIMITBL
AD_F_LIMITBH
0x0002
(2)
AD_F_LIMITCL
AD_F_LIMITCH
0x01EA
(490)
1: reference to Vdd
[2] Bit line read out power down
0: active
1: power down
[3] Bit line read select
0: bit line 3 is read out
1: bit line 646 is read out
[4] Bit line 3 external input enable
[5] Bit line 646 external input enable
[9:0] When auto slope adjustment is turned on, if
the slope counter exceeds this value, the ramp
will become steeper
[9:0] Wave table beginning point
[9:0] Wave table end point, when it is reached,
the waveform will remain fixed until the start of
next row
[9:0] Column position where the CDS subtraction
pulse is applied
[15:0] Current exposure time, read only
[9:0] Current frame width, read only
[15:0] Current frame height, read only
[9:0] Current column beginning position, read
only
[9:0] Current row beginning position, read only
[9:0] Current HSync end position, read only
[15:0] Current VSync end position, read only
[7:0] Current part control setting, read only
[9:0] Current wave table beginning point, read
only
[9:0] Current wave table end point, read only
[15:0] Threshold above which the row address
mapping mechanism will be activated
[15:0] Second threshold above which another
address mapping is kicking in
[15:0] The substitute row address when the
original address is above AD_F_OVER in the
vertically flipped mode and when
TIMING_CONTROL[12] is 0
[15:0] The substitute row address when the
original address is above AD_F_OVER in the
vertically flipped mode and when
TIMING_CONTROL[12] is 1
[15:0] The substitute row address when the
original address is between AD_F_MAX_ADDR
and AD_F_OVER in vertically flipped mode
©2000, 2001,2002 IC Media Corporation & IC Media Technology Corp
web site: http://www.ic-media.com/
web site: http://www.ic-media.com.tw/
page 10
10/16/2002
Confidential