XE900SL10 Datasheet, PDF (1/16 Pages) List of Unclassifed Manufacturers – Miniature Spread Spectrum Transceiver

XE900SL10
June 2005
XE900SL10 Miniature Spread Spectrum Transceiver
Description
The XE900SL10 breaks new ground in Smart Transceiver
Technology. It is a 900 MHz, Spread Spectrum
Transceiver with integral micro-controller, just 1 inch
square. This miniature size combined with low power
consumption make the XE900SL10 perfect for mobile
and battery powered applications.
Xecom did not drop features to reduce size. The
XE900SL10 still supports Xecom’s Count-Off™ feature
enabling a scan of up to 125 remote nodes in under 10
seconds. SensorOnAir™ allows sensors and control
lines to utilize the embedded communications controller
in place of a host micro-controller .
Xecom also offers a high power spread spectrum model,
the XE900S-500, for applications that require greater
range. The XE900S-500 has an obstructed range of up
to 1000 feet in a larger but still small package.
The XE900SL10 transmits at up to 10 milliwatts with a
receive sensitivity of -100 dBm to provide an obstructed
range of 300 feet. All from a 1 inch square transceiver
consuming less than .2W of power.
Features
* Small Size: 1.0” by 1.0” by 0.26”
* Serial Control and Configuration of the Wireless Link.
* Supports a 254 node point-to-multipoint network
* Output Power Programmable from 0 to 10 mW;
* Maximum Receiver Sensitivity -100 dBm
* Obstructed signal range to 300 feet;
* Wireless Data Rate 76.8K bps, half-duplex;
* Power Consumption:
55 mA @ 3.3 Volts when transmitting at 10 mW
less than 1 mA in Sleep Mode or Power-Down modes
* SensorOnAir^™ allows direct connection of sensors to
the Smart Transceiver
* Count-Off^™ allows the master node to download the
status of all nodes in under 10 seconds.
* Operating Temperature Range of -40 to +85 C
* FCC Part 15 Registered
Antenna
XE900SL10 Block Diagram
ROM
SAW
FILTER
MUX
UHF
TRANSCEIVER
Serial
I/F
Analog
Inputs
Digital
I/O
XECOM
(1)
XE900SL10