SUS01L Datasheet, PDF (1/4 Pages) List of Unclassifed Manufacturers – SWITCHING POWER SUPPLY ISO-9001 CERTIFIED MANUFACTURER

MEAN WELL
SWITCHING POWER SUPPLY
ISO-9001 CERTIFIED MANUFACTURER
SUS01L
SERIES
.UNREGULATED DC OUTPUT
.1000VDC I/O ISOLATION
.3000VDC ISOLATION IS AVAILABLE
.INPUT FILTER:CAPACITOR TYPE
.INTERNAL SMD TECHNOLOGY
.NO EXTERNAL COMPONENTS REQUIRED
.HIGH RELIABILITY / LOW COST
.100% BURN-IN TEST
.MTBF:700,000 HOURS
SPECIFICATION
MODEL
DC OUTPUT VOLTAGE
OUTPUT VOLTAGE ACCURACY
OUTPUT RATED CURRENT
OUTPUT CURRENT RANGE
RIPPLE & NOISE
LINE REGULATION
LOAD REGULATION
DC OUTPUT POWER
EFFICIENCY
SWITCHING FREQUENCY
INPUT VOLTAGE RANGE
INPUT CURRENT
SHORT CIRCUIT PROTECTION
OVER VOLTAGE PROTECTION
TEMP. COEFFICIENT
ISOLATION VOLTAGE
ISOLATION RESISTANCE
ISOLATION CAPACITANCE
WORKING TEMP., HUMIDITY
STORAGE TEMP., HUMIDITY
DIMENSION
WEIGHT
CASE METERIAL
SUS01L-05
SUS01L-09
SUS01L-12
5V
9V
12V
±2%
200mA
111mA
84mA
0-200mA
0-111mA
0-84mA
100mVp-p (max.)
± 1.2% FOR 1% INPUT VARIATION
± 8% @ 20%~FULL LOAD
1W
1W
1W
73%
75%
78%
100KHz min.
5V± 10% (4.5~5.5VDC)
274mA max.
MOMENTARY
----------
±0.03% / ºC (0~50ºC)
I/P-O/P:1KVDC MIN.
I/P-O/P:500VDC / 100M Ohms MIN.
80pF max.
-15ºC~+60ºC, 20%~90% RH (NO DERATING); 80% LOAD @ 71ºC
-25ºC~+85ºC, 10%~95% RH
0.89"*0.39"*0.33"
3.1g
NON-CONDUCTIVE PLASTIC
SUS01L-15
15V
67mA
0-67mA
1W
79%
MECHANISM AND PIN CONFIGURATION
Pin no.
1 & 16
6 & 11
7 & 10
8&9
Output
+Vin
-Vout
+Vout
-Vin
NOTE :
1.ALL PARAMETERS ARE SPECIFIED AT RATED INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT.
2.RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR.
3.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD.
4.LOAD REGULATION IS MEASURED FROM 20% TO 100% RATED LOAD.
1999-09-20