ST1510 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 0-5 Vdc FLUSH DIAPHRAGM PRESSURE TRANSDUCER

SERIES ST1510
DESCRIPTION
0-5 Vdc FLUSH DIAPHRAGM
PRESSURE TRANSDUCER
The STI Series ST1510 is a small, accurate, reliable flush diaphragm pressure transducer for measuring dynamic and static pressures. Available in absolute,
sealed gage, or true gage zero pressure reference, the unit is entirely welded of stainless steel. Features of design include long term stability, low sensitivity
to shock and vibration, wide temperature range, excellent response to transient pressures, infinite resolution and built in over-pressure protection.
SPECIFICATIONS
MECHANICAL CHARACTERISTICS
Standard Ranges: 0 - 3, 5, 10, 15, 25, 30, 50, 75, 100,
200, 500, 750, 1000, 1500 PSIA / PSIG.
Special ranges available.
Proof Pressure:
3 - 200 PSI ranges: 500 PSI.
500 PSI range and up: 1.5 times range.
Burst Pressure:
3 times range or 1500 PSI whichever is
greater.
Operating Media: Fluids and gases compatible with 316
stainless steel.
Mounting:
1.25" flange mountable.
1 1/4" NPT male mounting available.
Weight:
4.5 ounces.
Resolution:
Infinite.
Electrical
Receptacle:
Stainless steel hermetic to mate with
a PT06-10-6S (MS3116-10-6S).
Wiring:
Excitation +A, -D; Signal +B, -C;
No connection E, F. (Shunt avail.)
ENVIRONMENTAL CHARACTERISTICS
Compensated
Temp. Range:
-30°F to +170°F.
Operating
Temp. Range:
-65°F to +250°F.
Natural Freq:
1.0 kHz at 3 PSI to 25 kHz at 1500
PSI.
ELECTRICAL CHARACTERISTICS
Excitation:
22-35 Vdc unregulated at less than
30 mA. 10 Vdc excitation available.
Zero Balance:
0.00 ± 1% FS at 70°F.
Full Scale Output: 5.00 ± 0.050 Vdc at 70°F.
(10.0 ± 0.050 Vdc optional.)
Static Accuracy: ± 0.15% FS.
Therm. Zero Shift: Less than ± 0.005% FS/°F typical.
Therm. Sens. Shift: Less than ± 0.005% FS/°F typical.
Enclosure:
Body and pressure cavity of stainless
steel, hermetically sealed.
ORDERING INFORMATION
To order, specify the series number (ST1510), the
desired pressure range, and the three digit specification
number signifying the performance and configuration
parameters. Options are available. Please contact your
local representative or the factory.
For Example:
ST1 5 1 0
5 0 0G
000
Insulation/Isolation Greater than 100 megohms at 50 Vdc
Resistance:
at 70°F.
Basic Series #
Full Scale Pressure Range
PSIA
Zero Press. Reference PSIG sealed
PSIG True
Specification Code
(000 for basic
spec.