QPP-003 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – 60W, 869-894 MHz Class AB Power Stage

QuikPAC Module Data
QPP-003
60W, 869-894 MHz
Class AB Power Stage
General description:
The QPP-003 QuikPAC™ RF power module is an impedance
matched Class AB amplifier stage designed for use in the driver or
output stage of linear RF power amplifiers for cellular base stations.
The power transistor is fabricated using Xemod’s advanced design
LDMOS process. The gate terminal is connected directly to the
control voltage pin, allowing direct control of the bias. The user must
supply the proper value of V_GS to set the desired quiescent current.
Standard Operating Conditions
Parameter
Symbol
Frequency Range
F
Supply (Drain) Voltage
V_D
Bias (Gate) Voltage
V_G
Bias (Gate) Current, Average
I_G
RF Source & Load Impedance
Ω
Load Impedance for Stable Operation (All Phases)
VSWR
Operating Baseplate Temperature
TOP
Output Device Thermal Resistance, Channel to Baseplate
Θjc
Maximum Ratings
Parameter
Supply (Drain) Voltage
Control (Gate) Voltage, VDD = 0 VDC
Input RF Power
Load Impedance for continuous operation without damage
Output Device Channel Temperature
Lead Soldering Temperature
Storage Temperature
Performance at 28VDC & 25ºC
Parameter
Supply (Drain) Voltage
Quiescent Current (total) (1)
Power Output at 1 dB Compression (single tone)
Gain at 12W PEP (two tone)
Gain Variation over frequency at 12W Output (two tone)
Input Return Loss (50 Ω Ref) at 12W PEP (two tone)
Drain Efficiency at 60W Pout (single tone)
Drain Efficiency at 60W PEP (two tone)
3^rd Order IMD Product (2 tone at 60W PEP;1 MHz spacing)
Symbol
V_D1,2
I_DQ
P_-1
G
∆G
IRL
η
η
Features:
Single Polarity Operation
Matched for 50 Ω RF interfaces
XeMOS FET Technology
Stable Performance
QuikPAC System Compatible
QuikClip or Flange Mounting
Min
Nom
Max
Units
869
894
MHz
26.0
28.0
32.0
VDC
3.6
VDC
2.0
mA
50
Ohms
10:1
-20
+90
ºC
1.1
ºC/W
Symbol
VDD
VG
PIN
VSWR
TSTG
Value
35
15
5
3:1
200
+190
-65 to +150
Units
VDC
VDC
W
ºC
ºC
ºC
Min
Nom
Max
Units
27.5
28.0
28.5
VDC
540
600
660
mA
60
70
W
14.0
15.0
dB
0.3
0.5
dB
12.0
14.0
dB
40
45
%
30
32
%
-28
-26
dBc
XEMOD RESERVES THE RIGHT TO MAKE CHANGES TO THIS SPECIFICATION WITHOUT FURTHER NOTICE. BEFORE THE
PRODUCT DESCRIBED HERE IS WRITTEN INTO SPECIFICATIONS OR USED IN CRITICAL APPLICATIONS, THE PERFORMANCE
CHARACTERISTICS SHOULD BE VERIFIED BY CONTACTING XEMOD.
Xemod QuikPAC Data
QPP-003
www.xemod.com
Rev A (11-21-00) Page 1 of 2