PMP-400 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Quik-Spec Power Module Panel

Technical Data 1146
Effective July 2014
Supersedes June 2008
Quik-Spec Power Module Panel
All-in-one elevator disconnect
Product description:
The Quik-Spec™ Power Module Panel (PMP) is an
all-in-one multi-elevator disconnect switch available
in configurations to meet virtually any shutdown
and disconnect requirement.
Features and options:
• 400-800 amp bus MLO and/or main fused
switch*
• 200kA RMS short-circuit current rating
• Feeder switches 30-200 amp, 600Vac with
Class J clips¹
• Copper bus
Optional features:
• Control power transformer with fuses and
blocks
• Fire safety interface relay
• Key to test switch
• Pilot light – “ON”
• Isolated neutral lug²
• Mechanically interlocked auxiliary contact for
hydraulic elevators with battery backup (5 amp
120Vac rated)
• Fire alarm voltage monitoring relay (to monitor
shunt trip voltage)
• NEMA 3R enclosures available (consult factory)
• Phase failure and undervoltage relay available
(consult factory)
• For added safety, use the Bussmann SAMI™
fuse covers to improve maintenance personnel
protection [OSHA 1910.335(A)(2)(ii)]³
Agency information:
• UL 67 enclosed and dead-front switches
* Contact Bussmann for applications greater than 800 amps.
1Class J fuses not included.
2Oversized 200% rated neutral option available where required by
excessive non-linear loads.
3Through 100A.