PMOD8LD Datasheet, PDF (1/1 Pages) List of Unclassifed Manufacturers – The Pmod8LD has eight high-bright LEDs that are driven by logic-level transistors so each LED can be illuminated with a logic high signal that provides less than 1mA of current.

Digilent Pmod8LD™
Reference Manual
Revision: June 3, 2009
Overview
The Pmod8LD has eight high-bright LEDs that
are driven by logic-level transistors so each
LED can be illuminated with a logic high signal
that provides less than 1mA of current.
Features include:
• eight high bright green LEDs
• a 12-pin system connector
• a transistor amplifier system that allows
low-power logic-level control
• small form factor (0.80” x 1.10”).
Functional Description
Each LED can be activated separately or
simultaneously. To activate an LED, the pin
connected to the LED must receive about 1mA
of current.
The LED module has a 12-pin header for easy
connection to a Digilent system board. For
some boards, using a 6-pin cable for
connection may be preferable, especially with
6-pin headers.
For older boards, a Digilent Modular Interface
Board (MIB) and a 6-pin cable may be needed.
The MIB plugs into the system board, and the
cable connects the MIB to the LED module.
For more information see www.digilentinc.com.
215 E Main Suite D | Pullman, WA 99163
[phone] Voice and Fax
Doc: 502-163
page 1 of 1
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.