PF240A25 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – Up to 25Amp 120/240, 380, 480 Vac AC Output

Series PF, PowerFin^TM
Up to 25Amp • 120/240, 380, 480 Vac • AC Output
• Ultra High Steady State
Current Rating
• Low Leakage (Off- State )
• SCR Output
• AC or DC Control
• Crydom's Patented Design
Crydom's PowerFin^TM series delivers the
highest ratings of any single in-line pack-
age (SIP). The integral heat sink design
can operate at 25 amps RMS in forced air
at 85˚ûC case temp. With natural convec-
tion in free air, it rates 10 amps RMS at
25û˚C ambient.
Built-in advantages include Surface Mount
Technology and SCR output.
Manufactured in Crydom's ISO 9001
Certified facility for optimum product
performance and reliability.
MODEL NUMBERS
OUTPUT SPECIFICATIONS ➀
Operating Voltage (47-63 Hz) [Vrms]
AC CONTROL (120Vac)
(24Vac)
DC CONTROL (5Vdc)
(24Vdc)
Load Current Range [Arms]
Transient Overvoltage [Vpk]
Max. Surge Current, (16.6ms) [Apk]
Max. On-State Voltage Drop @ Rated Current [Vpk]
Maximum I² t for Fusing, (8.3 msec.) [A²sec]
Max. Off-State Leakage Current @ Rated Voltage [mArms]
Min. Off-State dv/dt @ Max. Rated Voltage [V/µsec] ➁
Max. Turn-On Time ➃
Max. Turn-Off Time
Power Factor (Min.) with Max. Load
PF240A25
PFE240A25
PF240D25
PFE240D25
PF380D25
PFE380D25
PF480D25
PFE480D25
12-280
48-530
48-660
Forced Air.06-25 ➂
Convection Air .06-10
600
1200
1200
250
250
250
1.6
1.6
1.6
260
260
260
0.1
0.1
0.1
500
500
500
1/2 Cycle (DC Control), 10.0 msec (AC Control)
1/2 Cycle (DC Control), 40.0 msec (AC Control)
0.5
0.5
0.5
INPUT SPECIFICATIONS ➀
Nominal Voltage 5Vdc
MODEL NUMBERS
PF240D25
Control Voltage Range
3-15 Vdc
DC CONTROL
5Vdc
PF380D25
PF480D25
4-15 Vdc
24Vdc
PFE240D25
PFE380D25
PFE480D25
15-32 Vdc
AC CONTROL
120Vac
24Vac
PF240A25
90-140 Vrms
PFE240A25
18-36 Vrms
Max. Turn-On Voltage
3.0 Vdc
4.0 Vdc
15.0 Vdc
90.0 Vrms
18.0 Vrms
Min. Turn-Off Voltage
1.0 Vdc
1.0 Vdc
1.0 Vdc
10.0 Vrms
2.0 Vrms
Nominal Input Impedance
300 Ohm
240 Ohm
1500 Ohm
14.1k Ohm
4.2k Ohm
Typical Input Current @ Nominal Voltage
15 mAdc
15 mAdc
15 mAdc
10 mArms
5 mArms
GENERAL NOTES
➀ All parameters at 25˚C unless otherwise specified.
➁ Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1
➂ Heatsink temperature 85ûC Maximum.
➃ Turn-On Time for Random Turn-On versions 0.1msec (DC Control Models).
© 2002 CRYDOM CORP, Specifications subject to change without notice.
FastFax Document No. 115
SERIES PF
Rev. 041902
PAGE 1 OF 2
For recommended applications and more information contact:
USA: Sales Support [phone] Tech Support [phone] FAX [phone]
Crydom Corp, 2320 Paseo de las Americas, Ste. 201, San Diego, CA 92154
Email: [e-mail] WEB SITE: http://www.crydom.com
UK: [phone] • FAX [phone] Crydom International Ltd., 7 Cobham
Road, Ferndown Industrial Estate, Ferndown, Dorset BH21 7PE, Email: [e-mail].
GERMANY: [phone]