MT9P031 Datasheet, PDF (1/46 Pages) List of Unclassifed Manufacturers – 1/2.5-Inch 5Mp CMOS Digital Image Sensor

MT9P031: 1/2.5-Inch 5Mp Digital Image Sensor
Features
1/2.5-Inch 5Mp CMOS Digital Image Sensor
MT9P031
For the latest data sheet, refer to Aptina’s Web site: www.aptina.com
Features
• High frame rate
• Superior low-light performance
• Low dark current
• Global reset release, which starts the exposure of all
rows simultaneously
• Bulb exposure mode, for arbitrary exposure times
• Snapshot mode to take frames on demand
• Horizontal and vertical mirror image
• Column and row skip modes to reduce image size
without reducing field-of-view (FOV)
• Column and row binning modes to improve image
quality when resizing
• Simple two-wire serial interface
• Programmable controls: gain, frame rate, frame size,
exposure
• Automatic black level calibration
• On-chip phase-locked loop (PLL)
Applications
• High resolution network cameras
• Wide FOV cameras
• 720P–60 fps cameras
• Dome cameras with electronic pan, tile, and zoom
• Hybrid video cameras with high resolution stills
• Detailed feature extraction for smart cameras
Ordering Information
Table 1:
Available Part Numbers
Part Number
MT9P031I12STC
MT9P031I12STD
MT9P031I12STH
Description
48-pin iLCC 7 deg
48-pin iLCC ES demo
48-pin iLCC headboard
Table 2:
Key Performance Parameters
Parameter
Value
Optical format
Active imager size
Active pixels
Pixel size
1/2.5-inch (4:3)
5.70mm(H) x 4.28mm(V)
7.13mm diagonal
2592H x 1944V
2.2 x 2.2μm
Color filter array
RGB Bayer pattern
Global reset release (GRR),
Shutter type
Snapshot only
Electronic rolling shutter (ERS)
Maximum data rate/
master clock
Full resolution
Frame VGA
rate (640 x 480, with
96 Mp/s at 96 MHz (2.8V I/O)
48 Mp/s at 48 MHz (1.8V I/O)
Programmable up to 14 fps
Programmable up to 53 fps
binning)
ADC resolution
12-bit, on-chip
Responsivity
Pixel dynamic range
1.4 V/lux-sec (550nm)
70.1dB
SNR_MAX
Supply I/O
Voltage Digital
Analog
Power consumption
38.1dB
1.7−3.1V
1.7−1.9V (1.8V nominal)
2.6−3.1V (2.8V nominal)
381mW at 15 fps full resolution
Operating temperature
Packaging
–30°C to +70°C
48-pin iLCC, die
The 5Mp CMOS image sensor features Aptina’s break-
through low-noise CMOS imaging technology that
achieves CCD image quality (based on signal-to-noise
ratio and low-light sensitivity) while maintaining the
inherent size, cost, and integration advantages of
CMOS.
General Description
The Aptina^® MT9P031 is a 1/2.5-inch CMOS active-
pixel digital image sensor with an active imaging pixel
array of 2592H x 1944V. It incorporates sophisticated
camera functions on-chip such as windowing, column
and row skip mode, and snapshot mode. It is program-
mable through a simple two-wire serial interface.
PDF: 0548592346/Source:9863314264
MT9P031_DS - Rev. F 5/11 EN
1
.
©2005 Aptina Imaging Corporation All rights reserved.
.