MSS1260 Datasheet, PDF (1/2 Pages) List of Unclassifed Manufacturers – SMT Power Inductors

Document 281-1
SMT Power Inductors - MSS1260 Series
The MSS1260 Series provides high inductance and
high efficiency in a low profile, low cost part.
The magnetic shielding and small footprint of these
inductors allows high density mounting. The flat top
ensures reliable pick and place handling.
They’re ideal for use in DC-DC converters, LCD panels,
and portable devices where low cost and high reliabilty
are critical.
In addition to the standard values shown, Coilcraft can
custom-engineer versions to meet specific applications.
Free evaluation samples are available by contacting
Coilcraft or on the web at www.coilcraft.com.
Part number¹
Irms
DCR ³SRF³
20°C 40°C
2_L2
max typ ⁴Isat⁴ rise rise
(µH)
(⏲) (MHz) (A) (A) (A)
MSS1260-102NX_
MSS1260-152NX_
MSS1260-222NX_
MSS1260-332NX_
MSS1260-472MX_
1.0 ±30% 0.010 100.0 10.00
1.5
0.013 80.0 8.50
2.2
0.014 55.0 7.50
3.3
0.016 42.0 6.50
4.7 ±20% 0.020 33.0 5.80
6.00 8.00
6.00 7.50
5.50 7.00
5.00 7.00
4.50 7.00
MSS1260-562MX_ 5.6
MSS1260-682MX_ 6.8
MSS1260-822MX_ 8.2
MSS1260-103MX_ 10
MSS1260-123MX_ 12
0.022 30.0 5.30 4.00 6.40
0.023 27.0 4.90 3.80 5.90
0.025 26.0 4.40 3.40 4.80
0.028 22.0 4.00 3.00 4.00
0.032 20.0 3.60 2.80 3.70
MSS1260-153MX_ 15
MSS1260-183MX_ 18
MSS1260-223MX_ 22
MSS1260-273MX_ 27
MSS1260-333MX_ 33
0.040 18.0 3.30 2.60 3.50
0.045 16.0 3.00 2.50 3.30
0.052 15.0 2.70 2.30 3.10
0.065 13.0 2.40 2.10 2.90
0.075 12.4 2.20 2.00 2.70
MSS1260-393MX_ 39
MSS1260-473MX_ 47
MSS1260-563MX_ 56
MSS1260-683MX_ 68
MSS1260-823MX_ 82
0.080 12.0 2.00 1.90 2.60
0.100 11.6 1.85 1.85 2.50
0.120 10.5 1.70 1.75 2.40
0.130 10.0 1.55 1.70 2.30
0.160 8.6 1.40 1.60 2.20
MSS1260-104MX_
MSS1260-124KX_
MSS1260-154KX_
MSS1260-184KX_
MSS1260-224KX_
100
120 ±10%
150
180
220
0.190
0.250
0.280
0.320
0.420
7.8 1.25 1.50 2.10
6.8 1.15 1.38 1.85
6.4 1.00 1.20 1.66
6.1 0.95 1.14 1.58
5.5 0.85 1.00 1.42
MSS1260-274KX_ 270
MSS1260-334KX_ 330
MSS1260-394KX_ 390
MSS1260-474KX_ 470
MSS1260-564KX_ 560
0.480
0.630
0.700
0.900
1.000
4.3 0.75 0.90 1.45
4.0 0.70 0.84 1.16
3.6 0.65 0.78 1.08
3.0 0.58 0.70 0.96
2.8 0.53 0.64 0.88
MSS1260-684KX_ 680
MSS1260-824KX_ 820
MSS1260-105KX_ 1000
1.200
1.600
1.850
2.6 0.48 0.58 0.80
2.5 0.44 0.53 0.73
2.4 0.40 0.48 0.68
0.24 ±0.01
6,0 ±0,2
0.484 _max
12,3
0.484 _max
12,3
XXX
0.197
5,0
0.197
5,0
0.177
4,5
0.217
5,5
0.138
3,5
0.157
4,0
Recommended
Land Pattern
Parts/reel: 13″ 500 Tape width: 24 mm
For packaging data see Tape and Reel Specifications section.
1. When ordering, please specify packaging code:
MSS1260-184KX _
Packaging code:
D= 13″ machine-ready reel EIA-481 embossed plastic tape (500 per full reel).
B = Less than full reel In tape, but not machine-ready. To have a
leader and trailer added ($25 charge), use code letter D instead.
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc on Agilent/HP 4284A LC
meter or equivalent.
3. SRF measured using Agilent/HP 4191A or equilvalent.
4. DC current at which the inductance drops 10% (typ) from its value without
current.
5. Operating temperature range -40°C to +85°C.
6. Electrical specifications at 25°C.
See Qualification Standards section for environmental and test data.
Specifications subject to change without notice. Document 281-1 Revised 11/04/02